Philips 64PH9905 manual Surround Sound, Connect both external, Place the speakers so

	ATSC/DIGITAL SOUND MENU CONTROLS
	SURROUND SOUND
	y adding optional external								REAR OF DPTV
	Bspeakers to the DPTV's sound
			REAR SURROUND SOUND
	system, you can create the feeling		SPEAKER TERMINALS
	of reflected sound that surrounds		(Operational only in ATSC or
			Monitor Display modes)
	you at a movie theater or concert
									1
	hall.
	BEGIN		SURROUND EXTERNAL SPEAKERS OUT
1	Connect both external
	speakers to the speaker wire		+		–	–		+
	terminals on the DPTV.			R			L
	Recommended speakers: 25W, 8		All External Speakers
	ohm minimum. Be sure the (+) and
				25W, 8 ohms Min.
	(-) speaker wires are connected to
	the correct R(ight) and L(eft)
	speaker terminals on the DPTV.
2	Place the speakers so the
	viewing area is between the DPTV
	and the rear surround speakers.
	(See overhead view drawing on
	this page.)
3	Turn DPTV ON. After setup	+	-					+	-
	whenever a stereo signal is
	received the audio will be heard in
	Surround Sound.
	STOP
	SMART HELP		REAR SURROUND SOUND SPEAKERS
			• Note: Surround Sound will not work with only
	Note: The rear Surround		one speaker connected; or with monaural audio
			playback source
	Sound speakers will not be
	heard at the same volume level as
	the front DPTV speakers. It is							DPTV
	intended for the rear speakers to
	give a background noise effect
	which requires a lower volume
	level than the DPTV's front
	speakers.
			2
				REAR SPEAKER				REAR SPEAKER
				PRIMARY VIEWING AREA
			38