Philips 64PH9905 manual RED/BLUE Convergence, Select Convergence, Press the Menu buttons

	NTSC/ANALOG PICTURE MENU CONTROLS
	RED/BLUE CONVERGENCE
	onvergence is the correct
	Clining up of the red and blue		NTSC
	light paths on the DPTV screen.			ANALOG MAIN MENU
	NOTE: If no color fringing (see
				PICTURE			SOUND
	Smart Help) shows, then no
	Convergence adjustments are			FEATURES				PICTURE MENU
	necessary.			1ST TIME SETUP			EXIT	COLOR	TINT
	BEGIN							BRIGHT	PICTURE
1	Select CONVERGENCE							SHARP	CLEARVIEW
	control.							EXIT	MORE...
	With PICTURE MENU (2 of 2)								1 OF 2
	on-screen, move the RED highlight
	with the MENU	buttons. Then
	press the MENU button.		2
2								PICTURE MENU
	Press the MENU ▲▼ buttons		1				mute
						2		CONVERGENCE
	to select either the Red or Blue
	Convergence control, press the		menu				volume	VIDEO ENHANCEMENT
	MENU button to continue.						+
				ok
							2	EXIT	MORE...
3
	Press the MENU	buttons		exit					2 OF 2
	to move the selected red (or blue)		3/3	Analog	DTV	1	3
	convergence cross directly over the		4
	white cross on the DPTV screen.

The red (or blue) cross is properly	CONVERGENCE MENU
adjusted when it is completely	ALIGN RED
	ALIGN BLUE
merged with the white cross. (No
	CONVERGE MULTI POINT
color appears around the edge of
	BACK
the white cross).

4Press the “exit” button to clear the screen when convergence adjustments are complete.

STOP

SMART HELP

Remember, Convergence

has been set at the factory for

best viewing, but if one or more of

the (red or blue) colors appear

around the edges of objects (color

fringing) follow the steps given in

PRESS TO ALIGN RED

PRESS MENU TO RETURN

this section.

NOTE: Adjustments for “Multi-Point” on- screen color fringing can also be made as part of the DPTV’s Convergence control system. Follow the on screen menu directions to select individual screen areas that can be readjusted and set for varying red/blue color fringing conditions. These multi-point settings can then be “Saved” to memory for the specific areas of the DPTV screen (or Factory Settings for convergence can be recalled and put back into place for use).

MULTI-POINT CONVERGENCE CONTROLS

CONVERGENCE MULTI POINT
CONVERGE RED POINTS
CONVERGE BLUE POINTS
RESTORE FACTORY SETTINGS
SAVE ADJUSTMENTS
BACK	CONVERGE RED POINTS
	USE	TO ADJUST
	DIGIT 2, 4, 6, 8 TO MOVE CURSOR
	MENU TO RETURN
	PRESS MENU NOW TO CONTINUE

9