5.7Timer
By means of the timer setting, you can switch your Digital Terrestrial Receiver on and off at a specific time. For example, it can allow a recording with a recorder device.The device then automatically switches on in the standby mode. If the device is already switched on, the device automatically switches to the selected programme.
Note
Remember to program your recorder device to the respective time.
Adding a programme to timer list
The timer function is included into the timer list via the EPG. Refer to previous paragraph.
Open the EPG and highlight the desired programme.
Press the TIMER key. By default, the answer to the confirmation question is Yes.
Press the OK key.
The window is closed and the selected programme is stored in the timer list.
Editing timer list
During the normal programme replay, press the TIMER key to open the timer list.
Deleting (a) programme(s) from the timer list
Select the desired programme.
Press the respective coloured key:
•Red: the selected programme is deleted
•Yellow: all programmes are deleted.
Choose Yes using the arrow key 
. Press OK to confirm the request.
Timer editing
In the Timer list, select the desired programme and press OK.
Change the displayed settings by using the arrow and numerical keys.Then you can:
•Change the date (month and day)
•Set the time (starting and end time)
•The cycle (interesting for series and regularly recurring programmes)
Then highlight OK, and press the OK key.
E N G L I S H
Use more of your Digital Terrestrial Receiver | 23 |