7Accessories and connections
E N G L I S H
7.1Recorder connection
Connect the supplied scart cable to the
VCR scart socket at the rear of the Digital Terrestrial Receiver and to the scart input EXT1 of the recorder.
Connect the aerial cable from the wall socket to the RF IN socket at the rear of the Digital Terrestrial Receiver.
Connect the RF OUT socket at the rear of the Digital Terrestrial Receiver to the ANT IN socket at the rear of the recorder using a coaxial cable.
Connect the ANT OUT socket at the rear of your recorder to the RF input of your TV set using a coaxial cable.
Connect a scart cable to the scart input of the TV set and to the TV scart socket at the rear of the Digital Terrestrial Receiver.
Plug your Digital Terrestrial Receiver to the mains using the supplied power adaptor.
Warning
To be able to record digital television, you must make sure the Digital Terrestrial Receiver is on.
7.2Audio connection
Analogue connection
Connect the L/R audio outputs of the Digital Terrestrial Receiver to the relevant input of your audio equipment using a double CINCH cable (not supplied).
Consult the user manual of your audio equipment to choose the proper analogue audio inputs.
Digital connection
Connect the SPDIF output of the Digital Terrestrial Receiver to the relevant input of your audio equipment using a single CINCH cable (not supplied).
Consult the user manual of your audio equipment to choose the proper digital audio input.
Accessories and connections | 27 |