Philips 42PF9641D/10 instruction manual Custom colour, Separation, Ambilight in standby mode

Page 22

EN

 

Enjoy Ambilight (Continued)

 

 

 

TV menu

 

TV settings

Ambilight

Settings assistant

Reset to standard

Mode

Picture

Colour

Sound

Custom colour

Ambilight

Separation

 

Balance

Info

 

Custom colour

Note: only available when Custom has been selected in the Colour menu.

Allows you to customise the ambilight colour.

<Select Palette to select the general colour of the light output.

<Select Saturation to adjust the colourfulness of the light.

Separation

Allows you to define the stereo effect in case, Relaxed, Moderate or Dynamic has been selected in the Mode menu.

<Select Off for a mono behaviour which means that all lamps will behave equally.

<Select Minimum, Medium or Maximum to define the Ambilight stereo effect spread over the available lamps.

Balance

Allows you to adjust the colour and level of light intensity on the left and right side of the picture.

Ambilight in standby mode

When the TV is switched off, the ambient lights will also be switched off.When the TV is in standby mode, ambilight can be used to provide a unique ambience for the room.

<Press the Ambilight key on the remote control to switch between Ambilight On or Off. See Use of the remote control, p. 6.

<Press the MODE key repeatedly to toggle through the Ambilight modes.

Note: when the TV is switched to standby, and you switch Ambilight On, then less Ambilight modes are available.

Caution: Infrared interference

To avoid bad infrared remote control reception, place your peripheral equipment out of sight of the ambient lights of your TV. Ambilight does not function well when the room temperature is less than 59°F/15°C.

22

Image 22
Contents Contents Safety warnings Getting started Overview of the rear connector panelBefore you start Connect the antenna Remote controlConnect the mains Use of the remote control RC4401/01 AV Select your peripherals +P- Channel selectionDigit keys Previous channelUse of the Option key Keys at the right side of the TVIntroduction Digital TV Switch the TV onFirst time installation Follow the instructions on screenComplete the initial TV installation procedure Select your on-screen languageFollowing items will be presented sequentially Settings assistant select your TV settingsTotal How to navigate through the menus IntroductionInstallation allows you Use of the TV menu settings Adjust viewing and listening settingsUse of the Standard settings if present Individual settings for picture, sound and ambilightAdjust picture menu settings Digital Natural Motion Pixel PlusDynamic contrast Select Off, Minimum, Medium or Maximum Active control Colour enhancementLight sensor Allows you to adjust the sound output level Adjust sound menu settingsVolume BalanceAVL Automatic Volume Leveler Surround modeHeadphone volume Delta volumeAmbilight Allows you to adjust the light output of the ambilightsEnjoy Ambilight BrightnessColour For exampleCustom colour Ambilight in standby modeSeparation Adjust feature menu settings SubtitleChildlock SleeptimerSelect Sleeptimer Important you have forgotten your codeSet code/Change code On timerSelect Set or Change code Common interface DemoSelect your language preferences How to search for and store TV channelsInstallation menu Menu languageSelect your country Automatic installationInstallation update Store TV and radio channelsAnalogue manual installation Select Digital test reception and press the cursor rightReshuffle Uninstall reinstallRearrange the channel number list RenameSelect Teletext Set your preferencesSelect your location Select the On Screen Display OSDDigital Audio Select your connectionsSelect a Decoder channel number Select ConnectionsReset the Factory settings How to upgrade the TV softwareTo select another favourite channel list Create your favourite listTo select a channel from the displayed favourite list To create a favourite list or to modify the listTo select only TV or only radio channels on the All Create your favourite channels listChannels list TipsEPG Electronic Programme Guide What’s onTo insert a USB device To view content from a USB deviceMultimedia Browser To remove the USB deviceMultimedia Browser menu Following icons may appearDetails Multimedia function keys on the remote controlFunction keys at the bottom of the screen Window over the screen with the cursor KeysTeletext Teletext menu HypertextEnlarge a Teletext RevealDigital text only for UK Text infoTo make video and audio connections Camera, Camcorder, Game To make video and audio connections Side panel overviewHeadphone To make video and audio connections Rear panel overview CableWith the aerial cable only Connect a VCR or DVD recorderWith a eurocable Connect a decoder and a VCRConnect a satellite receiver With Component Video connectorsConnect two VCRs or VCR and DVD recorder With eurocablesConnect a DVD player, HD receiver or game console With a Hdmi connectorWith a DVI connector Connect a DVD player or HD receiverConnect a DVD player, a satellite receiver or HD receiver Connect a PC PC equipped with a VGA connectorPC equipped with a DVI connector With Digital audio With Analogue audioDigital Home Cinema amplifier Connect a Home Cinema amplifierAnalogue Home Cinema amplifier Use the Common Interface slot Insert a CA moduleRecord with your recorder Select InstallationSelect connected equipment Record a TV programmeAudio- and video equipment keys To select between Normal and Expert modeTo switch the menu on or off Digit entryTroubleshooting Sound problem Symptom Possible cause/Remedy Remote doesNo solution found Not functionPreparing a USB portable memory for software upgrade Annex 1 Philips TV software upgrade with portable memoryVerifying the version of the TV software Upgrade the TV software AnnexLocal software upgrade procedure General Format Annex 2 Philips TV-Slideshow Format with background musicGeneral Rules Following syntax should be used to create the text fileSupported XML-tags Tag Name Use DescriptionUSB Memory Device Issues Annex 3 Philips TV Digital camera and USB issuesDigital Camera Issues Digital Content IssuesExtra analogue audio cable Sound interruptions using Hdmi to Hdmi connectionExtra digital audio cable Index 11,34Recycling RecyclingProduct information Disposal of your old product
Related manuals
Manual 66 pages 50 Kb

42PF9641D/10 specifications

The Philips 42PF9631D/10, 42PF9641D/10, and 37PF9631D/10 are part of Philips' renowned line of Flat TV models, showcasing advanced technology and features that enhance the viewing experience for users. These models are often praised for their stunning displays and cutting-edge functionalities designed for both home cinema enthusiasts and everyday viewers.

One of the standout features of these models is their display technology. They utilize the Ambilight system, a unique Philips innovation that extends the viewing experience beyond the screen. Ambilight enhances the ambiance of a room by projecting colored light onto the wall behind the TV, synchronized with the content on-screen. This creates an immersive experience, making movies and shows far more engaging.

The Philips 42PF9631D/10 and 42PF9641D/10 both feature a Full HD resolution of 1920 x 1080 pixels, ensuring crystal-clear images with vibrant colors and remarkable detail. The 37PF9631D/10, featuring a 37-inch display, also offers Full HD resolution, though at a slightly reduced size, making it ideal for smaller spaces without sacrificing picture quality.

These models come equipped with Pixel Plus technology, which enhances image quality by reducing noise and increasing sharpness, giving users a premium viewing experience. This technology works in conjunction with the high brightness and contrast ratios that the televisions boast, ensuring deep blacks and bright highlights for a well-rounded picture.

Connectivity options are abundant in these models, featuring multiple HDMI ports, allowing users to connect various devices, such as gaming consoles, Blu-ray players, and set-top boxes. The inclusion of USB ports enables direct playback of media from external storage devices, promoting versatility in how content can be enjoyed.

Additionally, these televisions are designed with user-friendly interfaces, providing easy navigation through settings and features. They support a variety of broadcasting standards, ensuring compatibility with numerous television formats.

Moreover, with the integration of digital tuners, these models are ready to receive both analog and digital signals, future-proofing your viewing needs. The overall design of the Philips 42PF9631D/10, 42PF9641D/10, and 37PF9631D/10 is sleek and modern, making them a stylish addition to any living space.

In summary, the Philips 42PF9631D/10, 42PF9641D/10, and 37PF9631D/10 combine advanced technologies and thoughtful design to deliver an impressive viewing experience. Whether through their stunning displays, innovative features like Ambilight, or robust connectivity options, these Philips models stand out as excellent choices in the realm of modern televisions.