Philips 42PF9641D/10 Symptom Possible cause/Remedy Remote does, Not function, Connected equip

Page 56

EN

 

 

Troubleshooting (Continued)

 

 

 

 

 

 

Symptom

Possible cause/Remedy

 

 

 

 

 

 

The remote does

< Verify if the remote is set correctly for the equipment your are using.

 

 

not function

< Verify if the batteries are not dead. Replace the batteries.

 

 

 

You can still use the keys at the right side of the TV.

 

 

 

< Select TV mode on your remote control.

 

 

 

< When pressing a key and some key leds are blinking with a higher speed and

 

 

 

lower intensity than in a normal working condition, and your TV does not react on

 

 

 

the key press, remove the batteries out of the remote control and put them back

 

 

 

again.

 

 

 

 

 

 

The remote of

< The infrared signals of the screen may influence the reception sensibility

 

 

connected equip-

of other peripherals.

 

 

ment does not

Solution: replace the batteries of the remote of other peripheral

 

 

function well

equipment.

 

 

 

 

 

 

No photo or music

< Verify if the source complies with a supported code.

 

 

play or in poor

 

 

 

quality

 

 

 

 

 

 

 

No stable or not

< Verify if you have selected the correct VGA mode in your PC.

 

 

synchronised VGA

See Connect a PC, p. 50.

 

 

picture

< Verify the connections between the TV and the PC.

 

 

 

 

 

 

No solution found

< Switch off your TV off and then on again once.

 

 

for your picture or

Never attempt to repair a defective TV yourself.

 

 

sound problem

Verify with your dealer or call a TV technician.

 

 

 

 

 

 

Red blinking led

< Unplug the mains cord for 10 seconds and insert it in again.

 

 

 

 

 

 

Black bars with

< Select another picture format.

 

 

HD channels

 

 

 

 

 

 

 

No EPG data

< The Electronic Programme Guide function and background programme

 

 

available

information are only made available by TV channels that provide EPG

 

 

 

information and in countries which support EPG.

 

 

 

See www.philips.com/support.

 

 

 

 

56

Image 56
Contents Contents Safety warnings Before you start Overview of the rear connector panelGetting started Connect the mains Remote controlConnect the antenna Use of the remote control RC4401/01 +P- Channel selection Digit keysAV Select your peripherals Previous channelUse of the Option key Keys at the right side of the TVSwitch the TV on First time installationIntroduction Digital TV Follow the instructions on screenComplete the initial TV installation procedure Select your on-screen languageTotal Settings assistant select your TV settingsFollowing items will be presented sequentially How to navigate through the menus IntroductionInstallation allows you Use of the TV menu settings Adjust viewing and listening settingsUse of the Standard settings if present Individual settings for picture, sound and ambilightAdjust picture menu settings Dynamic contrast Pixel PlusDigital Natural Motion Light sensor Colour enhancementSelect Off, Minimum, Medium or Maximum Active control Adjust sound menu settings VolumeAllows you to adjust the sound output level BalanceSurround mode Headphone volumeAVL Automatic Volume Leveler Delta volumeAllows you to adjust the light output of the ambilights Enjoy AmbilightAmbilight BrightnessColour For exampleSeparation Ambilight in standby modeCustom colour Adjust feature menu settings SubtitleSleeptimer Select SleeptimerChildlock Important you have forgotten your codeSelect Set or Change code On timerSet code/Change code Common interface DemoHow to search for and store TV channels Installation menuSelect your language preferences Menu languageAutomatic installation Installation updateSelect your country Store TV and radio channelsAnalogue manual installation Select Digital test reception and press the cursor rightUninstall reinstall Rearrange the channel number listReshuffle RenameSet your preferences Select your locationSelect Teletext Select the On Screen Display OSDSelect your connections Select a Decoder channel numberDigital Audio Select ConnectionsReset the Factory settings How to upgrade the TV softwareCreate your favourite list To select a channel from the displayed favourite listTo select another favourite channel list To create a favourite list or to modify the listCreate your favourite channels list Channels listTo select only TV or only radio channels on the All TipsEPG Electronic Programme Guide What’s onTo view content from a USB device Multimedia BrowserTo insert a USB device To remove the USB deviceMultimedia Browser menu Following icons may appearMultimedia function keys on the remote control Function keys at the bottom of the screenDetails Window over the screen with the cursor KeysTeletext Hypertext Enlarge a TeletextTeletext menu RevealDigital text only for UK Text infoTo make video and audio connections Headphone To make video and audio connections Side panel overviewCamera, Camcorder, Game To make video and audio connections Rear panel overview CableConnect a VCR or DVD recorder With a eurocableWith the aerial cable only Connect a decoder and a VCRWith Component Video connectors Connect two VCRs or VCR and DVD recorderConnect a satellite receiver With eurocablesWith a Hdmi connector With a DVI connectorConnect a DVD player, HD receiver or game console Connect a DVD player or HD receiverConnect a DVD player, a satellite receiver or HD receiver PC equipped with a VGA connector PC equipped with a DVI connector With Digital audioConnect a PC With Analogue audioAnalogue Home Cinema amplifier Connect a Home Cinema amplifierDigital Home Cinema amplifier Use the Common Interface slot Insert a CA moduleSelect Installation Select connected equipmentRecord with your recorder Record a TV programmeTo select between Normal and Expert mode To switch the menu on or offAudio- and video equipment keys Digit entryTroubleshooting Symptom Possible cause/Remedy Remote does No solution foundSound problem Not functionVerifying the version of the TV software Annex 1 Philips TV software upgrade with portable memoryPreparing a USB portable memory for software upgrade Upgrade the TV software AnnexLocal software upgrade procedure Annex 2 Philips TV-Slideshow Format with background music General RulesGeneral Format Following syntax should be used to create the text fileSupported XML-tags Tag Name Use DescriptionAnnex 3 Philips TV Digital camera and USB issues Digital Camera IssuesUSB Memory Device Issues Digital Content IssuesExtra digital audio cable Sound interruptions using Hdmi to Hdmi connectionExtra analogue audio cable Index 11,34Recycling Product informationRecycling Disposal of your old product
Related manuals
Manual 66 pages 50 Kb

42PF9641D/10 specifications

The Philips 42PF9631D/10, 42PF9641D/10, and 37PF9631D/10 are part of Philips' renowned line of Flat TV models, showcasing advanced technology and features that enhance the viewing experience for users. These models are often praised for their stunning displays and cutting-edge functionalities designed for both home cinema enthusiasts and everyday viewers.

One of the standout features of these models is their display technology. They utilize the Ambilight system, a unique Philips innovation that extends the viewing experience beyond the screen. Ambilight enhances the ambiance of a room by projecting colored light onto the wall behind the TV, synchronized with the content on-screen. This creates an immersive experience, making movies and shows far more engaging.

The Philips 42PF9631D/10 and 42PF9641D/10 both feature a Full HD resolution of 1920 x 1080 pixels, ensuring crystal-clear images with vibrant colors and remarkable detail. The 37PF9631D/10, featuring a 37-inch display, also offers Full HD resolution, though at a slightly reduced size, making it ideal for smaller spaces without sacrificing picture quality.

These models come equipped with Pixel Plus technology, which enhances image quality by reducing noise and increasing sharpness, giving users a premium viewing experience. This technology works in conjunction with the high brightness and contrast ratios that the televisions boast, ensuring deep blacks and bright highlights for a well-rounded picture.

Connectivity options are abundant in these models, featuring multiple HDMI ports, allowing users to connect various devices, such as gaming consoles, Blu-ray players, and set-top boxes. The inclusion of USB ports enables direct playback of media from external storage devices, promoting versatility in how content can be enjoyed.

Additionally, these televisions are designed with user-friendly interfaces, providing easy navigation through settings and features. They support a variety of broadcasting standards, ensuring compatibility with numerous television formats.

Moreover, with the integration of digital tuners, these models are ready to receive both analog and digital signals, future-proofing your viewing needs. The overall design of the Philips 42PF9631D/10, 42PF9641D/10, and 37PF9631D/10 is sleek and modern, making them a stylish addition to any living space.

In summary, the Philips 42PF9631D/10, 42PF9641D/10, and 37PF9631D/10 combine advanced technologies and thoughtful design to deliver an impressive viewing experience. Whether through their stunning displays, innovative features like Ambilight, or robust connectivity options, these Philips models stand out as excellent choices in the realm of modern televisions.