Audio Setup, Hdmi Audio | Philips BDP3000/12 specs

•[Auto] - Enjoy vivid images in over a billion colors on Deep Color enabled TV.

•[Off] - Output standard 8 bit color.

[Component Video]

Select a component video output resolution that is compatible with the TV display capability.

•[480i/576i], [480p/576p], [720p], [1080i] - Select a video resolution setting that is best supported by the TV. See the TV manual for details.

Note

•• If the setting is not compatible with the TV, a blank screen appears. Wait for 10 seconds for auto recovery.

•• Copy protected DVDs can only output 480p/576p or 480i/576i resolution.

[Picture Settings]

Select a predefined set of picture color settings.

•[Standard] – Original color setting.

•[Vivid] – Vibrant color setting.

•[Cool] - Soft color setting.

•[Action] – Sharp color setting. It enhances the details in the dark area. Ideal for action movies.

•[Animation] – Contrast color setting. Ideal for animated pictures.

[Black Level]

Improve black color contrast.

•[Normal] - Standard black level.

•[Enhanced] - Enhance black level.

Audio Setup

1Press .

2Select [Settings], then press OK.

3Select [Audio Setup], then press .

4Select an option, then press OK.

5Select a setting, then press OK.

•To return to the previous menu, press BACK.

•To exit the menu, press .

18EN

[Night Mode]

Make a loud sound level softer and a soft sound level louder to play the disc at a low volume, without disturbing other persons.

•[Auto] - Applicable to tracks with Dolby True HD audio.

•[On] – For quiet viewing at night.

•[Off] – For surround sound with a full dynamic range.

Note

•• Applicable only to Dolby encoded DVD-video or BD- video.

[HDMI Audio]

Select an HDMI audio output when you connect this product and the TV/audio device with an HDMI cable.

•[Bitstream] – Select the best original HD audio experience (only via an HD audio compatible receiver).

•[Auto] – Detect and select the best supported audio format automatically.

[Digital Audio]

Select an audio format for the sound output from the DIGITAL OUT jack (coaxial/optical).

•[Auto] - Detect and select the best supported audio format automatically.

•[PCM] - The audio device does not support multi-channel format. Audio is downmixed to two-channel sound.

•[Bitstream] - Select the original audio to experience Dolby or DTS audio (BD-video special sound effect is disabled).

Note

•• Ensure that the audio format is supported by the disc and the connected audio device (amplifier/receiver).

•• When [Bitstream] is selected, interactive audio like button sound is muted.

[PCM Downsampling]

Set the sampling rate for PCM audio output from the DIGITAL OUT jack (coaxial/optical).

•[On] - PCM audio is down-sampled at 48kHz.

•[Off] - For BD or DVD recorded in LPCM without copyright protection, two-channel audio signals up to 96 kHz are output as LPCM signals with no conversion.