Philips Official Manual for BDP3000 Blu-ray Player: Software Updates and Care Instructions

Page 21

Tip

•• This information is needed for you to check if a latest software version is available at the Philips website so that you can download and install on this product.

[Restore Default Settings]

Reset all the settings of this product to the factory settings, except for [Parental Control] setting.

7 Additional Information

Update software

For software updates to enhance performance, check the current software version of this product to compare with the latest software (if available) at the Philips website.

1Press .

2Select [Settings], then press OK.

3Select [Advanced Setup] > [Version Info.], then press OK.

Update software via network

1Set up the network connection (see “Get started’ > “Set up network”).

2In the Home menu, select [Settings] > [Advanced Setup] > [Software Download] > [Network].

»» You are prompted to start upgrading processs if upgrade media is detected.

3Follow the instructions on the TV screen to confirm update operation.

»» Once software update is complete, this product automatically turns off to standby.

4Disconnect the power cord for a few seconds and connect again to turn on this product.

Update software via USB

1Go to www.philips.com/support to check if the latest software version is available for this product.

2Download the software into a USB flash drive:

A Un-zip the download, and make sure that the un-zipped folder is named “UPG”.

B Put the “UPG” folder in the root directory.

3Insert the USB flash drive to the USB jack of the rear panel.

4

In the Home menu, select [Settings] >

 

 

 

[Advanced Setup] > [Software Download] >

s h

 

[USB].

5

Follow the instructions on the TV screen to

ng l i

 

confirm update operation.

E

 

 

 

»» Once software update is complete, this

 

6

product automatically turns off to standby.

 

 

Disconnect the power cord for a few seconds

 

 

and connect again to turn on this product.

 

Note

•• Do not turn off the power or remove the USB flash drive when software updating is in progress to prevent possible damage of this product.

Care

Caution

•• Never use solvents such as benzene, thinner, cleaners available commercially, or anti-static sprays intended for discs.

Clean discs

Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement.

Specifications

Note

•• Specification and design are subject to change without notice

Play media

BD-Video, DVD-Video, DVD+R/+RW, DVD- R/-RW, DVD+R/-R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3-CD, WMA-CD, DivX (Ultra)-CD.

Accessories supplied

Remote control and batteries

Audio/Video cables

Power cable

Quick start guide

User manual

CD-ROM built in multi-lingual user manual (only available for the continental Europe version)

Video

Signal system: PAL / NTSC

Composite video output: 1 Vp-p (75 ohm)

EN 21

Image 21
Contents Register your product and get support at BDP3000 Laser Important notes for users in U.K Mains plugItalia Dichiarazione DI CONFORMITA’Contents Disposal of your old product and batteries Safety and important noticeCopyright notice Trademark noticeYour product Feature highlightsRegion codes BonusviewMain unit Product overviewRemote control Connect Connect video/audio cablesOption 1 Connect to the Hdmi jack Option 2 Connect to the component video jack Route audio to other devicesOption 3 Connect to the composite video jack Connect to digital amplifier/receiverGet started Connect powerConnect network Connect USB deviceNavigate the menu Prepare the remote controlFind the correct viewing channel Use the Home menuPlay Setup networkUse Philips EasyLink Play a discPlay video Disc content structureControl video play Change video playSkip play to a specific time Select title/chapterZoom in/out Repeat play for a specific sectionPlay music Play DivX videoControl a track Play photo Video setup Adjust settingsPress TV Display Select a display formatAudio Setup Off Output standard 8 bit color Component VideoHdmi Audio Preference Setup EasyLink SetupVCD PBC Network Download software from network Advanced SetupClear Memory DivX VOD Code Display the DivX registration codeSpecifications Update softwareAdditional Information CareCheck if the Hdmi cable is faulty. Replace a new Hdmi cable TroubleshootingPicture USBGlossary SoundPlay Hdcp DTSJpeg MP3Redistribution Open Source SoftwareIJG Jpeg software decoder Page Page Software END User License Agreement EULA-English UK EULA-English UK September