Philips BDP3100 Find the TV input, Use the Home menu, Navigate the menu, Set up a network

Note

•If you are not going to use the remote control for a long time, remove the batteries.

•Do not mix batteries (old and new or carbon and alkaline, etc.).

•Batteries contain chemical substances, so they should be disposed of properly.

Find the TV input

1Press to turn on this product.

2Turn on the TV and switch to the video input (refer to the TV user manual on how to select the A/V input).

Use the Home menu

1Press to display the home menu.

•To start disc play, select [play Disc].

•To view the USB contents, select [browse USB].

•To access the setup menus, select [Setup].

Navigate the menu

1When a menu is displayed, press the buttons on the remote control to navigate.

Select a menu display language

Note

•If this product is connected to a HDMI CEC compliant TV, skip this setting. It switches automatically to the same OSD menu language as per your TV setting (if the language set on TV is supported by this product).

1 In the Home menu, select [Setup] and press OK.

•The language options may vary from different regions.

4Press to select a language, and press OK.

Set up a network

To enjoy software updates of this product and BD-Live for certain Blu-ray discs, set up the network connection.

Note

•Ensure that the network cable is properly connected and the router is switched on.

1 Connect this product to the broadband modem or router.

2Press to display the home menu.

3Select [Setup] and press OK.