Philips BDP3100 user manual Laser Specification, Important notes for users in U.K Mains plug

Important notes for users in U.K.

Mains plug

This apparatus is fitted with an approved moulded plug. Should it become necessary to replace the main fuse, this must be replaced with a fuse of same value as indicated on the plug (example 10A). 1. Remove fuse cover and fuse.

2. The replacement fuse must comply with BS1362 and have the A.S.T.A. approval mark. If the fuse is lost, contact your dealer in order to verify the correct type.

3. Refit the fuse cover.

In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

LASER

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION:

INSIDE, NEAR THE DECK MECHANISM.

Laser Specification:

•Laser Type:

•BD Laser Diode: AlGaInN

•DVD Laser Diode: AlGaInP

•CD Laser Diode: AlGaInP

•Wave length:

•BD: 405 +5nm/-5nm

•DVD: 655 +10nm/-10nm

•CD: 790 +10nm/-20nm

•Output power:

•BD: Max. ratings: 20mW

•DVD: Max. ratings: 6mW

•CD: Max. ratings: 7mW