USB
Compatibility:
Class support: USB Mass Storage Class
File system: FAT16, FAT32
USB port: 5V 
, 500mA
Support HDD (a portable hard disc drive): an external power source may be needed.
Main unit
Power supply rating: AC
Power consumption: 11 W
Power consumption in standby mode: < 1 W
Dimensions (w x h x d): 310 x 40 x 203 (mm)
Net Weight: 1.1 kg
Accessories supplied
Remote control and 2 AAA batteries User manual
Optional accessory
A wireless Philips USB adapter(named WUB1110, sold separately)
Multimedia
Connectivity: USB
Ambient temperature: 5 deg C to 40 deg C.
Dongle dimensions (W x H x D): 28.4 x 82 x 13.4 mm
Laser Type (Diode): AlGaInN (BD), AlGaInP (DVD/CD)
Wave length:
Output power: 1mW (BD), 0.3mW (DVD), 0.28mW (CD)
6 Troubleshooting
English
Warning
Risk of electric shock. Never remove the casing of the player.
To keep the warranty valid, never try to repair the player yourself.
If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www.philips.com/support.
If you contact Philips, you will be asked for the model and serial number of this player.The model number and serial number are on the back of this player.Write the numbers here: Model No. _____________________________
Serial No. ______________________________
Main unit
The buttons on this player do not work. Disconnect this player from the power supply for a few minutes, and then
reconnect.
Picture
No picture.
Make sure that the TV is switched to the correct source input for this player. .
No picture on HDMI connection.
Make sure that the HDMI cable is not faulty. If it is faulty, replace with a new HDMI cable.
On the remote control, press | and then |
picture display. Or wait for 10 seconds for auto recovery.
If this player is connected to an unauthorized display device with an HDMI cable, the audio and video signals may not be output.
EN 17