11 | 12 | 1 |
10 |
| 2 |
9 |
| 3 |
8 |
| 4 |
75
6
HOOKING UP YOUR TV
ANTENNA
BEGIN
SMART
OUTDOOR/INDOOR
Acombination (outdoor or indoor) antenna receives normal broadcast channels
1
If your antenna has a
round cable (75 ohm) on the end, then you're ready to con- nect it to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.
1
Twin Lead Wire
2Push the round end of the
adapter (or antenna) onto the
75Ω ANT/CABLE plug on the rear of the TV. If the round end of the antenna wire is threaded,
screw it down tight.
| STOP |
| Note: Rear view of the model |
| TV is shown with an optional |
| ProKit 1 type module installed |
300 to 75Ω | for RF Input plug connections. |
Adapter |
|
2
HELP
Remember, 
set the TV for the type signal you've connected (see page 9).
Note: For homes with separate UHF and VHF antennas, you will need an optional combiner to connect to the TV. To order any optional accessory, contact your dealer
CABLE TV
OR |
|
Combination VHF/UHF Antenna |
|
(Outdoor or Indoor) |
|
Round Cable 75Ω | Back of TV |
BEGIN
or call the
8885).
CABLE INPUT/CONVERTER
Your Cable TV signal may be a single (75
ohm) cable or a Cable Converter Box installa- tion. In either case, the connection to the TV is easy.
1
If your Cable TV sig- nal is a single round cable (75
ohm), you're ready to connect to the TV. Go to step 2.
If you have a Cable Converter Box: Connect the
Cable TV signal to the IN plug on the Cable Converter Box.
2Connect the Cable TV signal to the 75Ω ANT/CABLE plug on the TV.
If you have a Cable Converter Box: Use a round cable (75Ω ) to connect the
OUT plug on the Cable Converter Box to the 75Ω ANT/CABLE plug on the
TV. | STOP |
| |
| Cable TV Signal |
|
| OR |
|
| IN | OUT |
|
|
|
| |
1 |
| Round Cable | Back of TV |
|
|
|
Cable Converter Box | 75Ω |
|
2
VCR TO TV
BASIC CONNECTION
The basic Antenna, or Cable, to VCR to TV
connection is shown to the right. For more informa- tion on hookups with Cable Converter Boxes, refer to your VCR and Cable Converter Box Owner's Manuals.
BEGIN |
|
| ||
1 | Connect your | 2 Connect the OUT TO TV plug | ||
Antenna or Cable TV signal | on the VCR to the 75Ω ANT/CABLE | |||
to the IN FROM ANT(enna) | plug on the TV (connecting cable sup- | |||
plug on the VCR. | plied with the VCR). | |||
Outdoor VHF/UHF | 300 to 75Ω | 1 | ||
Antenna | ||||
Adapter | ||||
|
|
| ||
| OR |
|
| |
|
| IN FROM ANT. OUT TO TV | ||
Cable TV signal |
| VCR | ||
|
| |||
|
|
| Round Cable | |
|
|
| 75Ω (supplied | |
|
|
| with VCR) | |
Back of TV
2
6