|
|
| TROUBLESHOOTING TIPS |
|
|
|
|
|
|
| SYMPTOMS | SUGGESTED STEPS TO TAKE |
| |
Settings |
| Error messages |
|
|
|
| appear on the |
|
|
|
| screen of TV: |
|
|
|
| No Signal | Check that the antenna / cable is connected properly and that you have selected the correct |
|
|
|
| tuner mode (refer to page 11). |
|
|
| No Program | There could be temporarily no transmission on the selected channel. You may like to add these |
|
|
|
| channels to the Weak Dig Sig. list. (refer to page 15). When transmission is resumed or when |
|
|
|
| available, your TV will receive it. |
|
|
| Audio Only | The current channel has only audio transmission. |
|
|
|
|
|
|
Sound |
| Sound is not in | This could be due to any of the following reasons: |
|
|
| Stereo. | 1. Not all transmitted broadcasts by the cable or broadcast stations are in STEREO. Try checking |
|
|
|
| with several major network stations to be sure that the station you selected is in STEREO. |
|
|
|
| 2. When SAP is turned ON, the sound mode is automatically set to MONO. |
|
|
|
| 3. Sound mode is set to MONO. Set the sound mode to STEREO. (Refer to page 19). |
|
|
|
| 4. When using an AV input, the television will not display STEREO even though it is producing |
|
|
|
| stereo sound. |
|
|
|
|
|
|
Sound |
| Disturbing sound | It is normal to hear a disturbing sound (such as buzzing, clicking, cracking, humming, whistling, etc) |
|
|
| (such as buzzing, | from a distance less than 2 meters (6 feet) with the television sound muted. |
|
|
| clicking, cracking, | If problem occurs on one channel, you may have a signal problem. Please contact the cable provider |
|
|
| humming, whistling | or local broadcaster regarding the specific channel. |
|
|
| etc.) |
|
|
|
|
|
|
|
General |
| No power to the | Check the TV power cord. Unplug the power cord from the TV, wait 10 seconds, then reinsert |
|
|
| TV | the plug into your wall outlet. Power On the TV again. |
|
|
|
| Plug the power cord directly to the wall socket and not via an extension cord. |
|
|
|
| If you need to use an extension cord, check that the fuse on the AC power strip is not blown. |
|
|
|
|
|
|
General |
| TV is not | Ensure the batteries are inserted into the remote control according to the illustration in the battery |
|
|
| responding to | compartment. Refer to page 7. |
|
|
| Remote Control |
|
|
|
|
| Reset the TV by disconnecting the power plug from the wall |
|
|
|
| outlet for 10 seconds and then reconnecting it again. |
|
|
|
|
|
|
General |
| No Picture on the | Check antenna connections. Are they properly secured to the TV ANT 75 ohm plug? |
|
|
| TV screen |
|
|
|
|
| Check the TUNER MODE control for the correct tuner setting. |
|
|
|
| Try running the Auto Install feature to find all available channels (refer to page 9). |
|
|
|
| Press the AV button on the remote control to make sure the correct signal source is selected |
|
|
|
| (FRONT, AV1, AV2, Current Channel, etc.). |
|
|
|
| Note: SVHS can only be selected if a |
|
|
|
|
|
|
General |
| TV Displays white | Some DVD Discs are encoded with as much as 30% more video information to give the best |
|
|
| lines in letterbox | possible picture quality. With the DVD Player in the 16:9 picture format, the playback of this |
|
|
| when viewing a | type of disc with extra video information can produce a number of small white lines in the |
|
|
| DVD disc | upper portion of the black letterbox area. With some of these discs, this problem is inherent |
|
|
|
| and does not require a service call. |
|
|
|
|
|
|
34