| SYMPTOMS | SUGGESTED STEPS TO TAKE |
Settings | Error | messages |
| appear on the | |
| screen | of TV: |
No SignalCheck that the antenna / cable is connected properly and that you have selected the correct tuner mode (refer to page 11).
No ProgramThere could be temporarily no transmission on the selected channel. You may like to add these
channels to the Weal< Dig Sig, list. (refer to page 15). When transmission is resumed or when available, your TV will receive it.
Sound
Audio Only
Sound is not in Stereo.
The current channel has only audio transmission.
This could be due to any of the following reasons:
1.Not all transmitted broadcasts by the cable or broadcast stations are in STEREO. Try checking with several major network stations to be sure that the station you selected is in STEREO.
2.When SAP is turned ON, the sound mode is automatically set to MONO.
3.Sound mode is set to MONO. Set the sound mode to STEREO. (Refer to page 19).
4.When using an AV input, the television will not display STEREO even though it is producing stereo sound.
Sound
General
General
General
General
Disturbing sound (such as buzzing, clicking, cracking, humming, whistling
etc.)
No power to the
TV
TV is not
responding to
Remote Control
No Picture on the
TV screen
TV Displays white lines in letterbox
when viewing a
DVD disc
It is normal to hear a disturbing sound (such as buzzing, clicking, cracking, humming, whistling, etc) from a distance less than 2 meters (6 feet) with the television sound muted.
If problem occurs on one channel, you may have a signal problem. Please contact the cable provider or local broadcaster regarding the specific channel.
Check the TV power cord. Unplug the power cord from the TV, wait 10 seconds, then reinsert the plug into your wall outlet. Power On the TV again,
Plug the power cord directly to the wall socket and not via an extension cord.
If you need to use an extension cord, check that the fuse on the AC power strip is not blown,
Ensure the batteries are inserted into the remote control according to the illustration in the battery
compartment, Refer to page 7,
Reset the TV by disconnecting the power plug from the wall
outlet for 10 seconds and then reconnecting it again,
Check antenna connections. Are they properly secured to the TV ANT 75 ohm plug?
Check the TUNER MODE control for the correct tuner setting.
Try running the Auto Install feature to find allavailable channels (refer to page 9).
Press the AV button on the remote control to make sure the correct signal source is selected (FRONT, AV1, AV2, Current Channel, etc.).
Note: SVHS can only be selected if a
Some DVD Discs are encoded with as much as 30% more video information to give the best possible picture quality. With the DVD Player in the 16:9 picture format, the playback of this type of disc with extra video information can produce a number of small white lines in the upper portion of the black [etterbox area. With some of these discs, this problem is inherent and does not require a service call.
34