AV3/AV4 Digital High Definition input
Y |
| RGB Y |
|
| AUDIO |
| AUDIO |
Pb | L | Pb | L |
Pr | R | Pr | R |
|
|
| VIDEO 2Fh |
AV 4 |
| 480p/1080i | |
| AV 3 | ||
ININ
When you have a digital equipment with a 480p or 1080i output (e.g. a digital Set Top Box or Progressive DVD player), connect it to the AV3 or AV4 IN VIDEO 2 Fh 480p/1080i input.
Connect the equipment with 2 Fh RGB output to the RGB, Y, Pb and Pr jacks and to the L and R AUDIO jacks of AV3.
Connect the equipment with 2Fh YPbPr output to the Y, Pb and Pr jacks and to the L and R AUDIO jacks of AV4. See also the manual of your High Definition equipment.
Note:This television is designed to accept high definition signal standards 1080i and 480p as specified by the Electronic Industries Association standard EIA770.3. Digital devices from different manufacturers has the possibility of differing output standards which may cause difficulties for the television to properly display.
Warning: in case you notice scrolling images, wrong colours or no colour, no picture, or even combinations of these on your screen, check if the connections are done in the right way.
The AV3 input can not be used to connect a computer or any other VGA device.
Side connections | Camera or camcorder |
S•VIDEO VIDEO AUDIO
1 2 3
&Connect your camera or camcorder to sockets at the right side of your TV.
éConnect the equipment to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect AUDIO R 3.
Note: If you prefer, you can also connect the camcorder to one of the TV’s rear AV IN jacks.
Headphone
&Insert the plug into the headphone socket L at the right side of the TV.
éPress ¬ on the remote control to switch off the internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5 mm jack.
In the Sound menu select Headphone volume to adjust the headphone volume.
16