Installing your television set

&Positioning your television set

5 cm

Place your TV on a solid, stable surface. To avoid accidents, do not expose the set to water and do not place anything on the set such as a cloth (mat), a container full of liquid (vase) or a heat source (lamp).

“Remote control

Insert the 2 R6-type batteries (supplied) making sure that they are the right way round. For environmental reasons the batteries supplied with this appliance do not contain mercury or nickel cadmium. Please do not discard your used batteries, use available recycling facilities (consult your dealer on this).

é Connections

‘ Switching on

•Insert the aerial plug into the : connector at the rear of the set.

•Insert the mains plug into the wall socket (220-240 V / 50 Hz).

To prevent damaging the mains (AC) cord which could cause of fire or electric shock, do not place the TV on the cord.

To switch on the set, press the on/off key. The indicator comes on and the screen lights up. If the television remains in standby, press P # on the remote control. Go straight to page 4. The indicator will flash when you use the remote control.

The keys on the TV set

- VOLUME + MENU - PROGRAM +

Depending on the model, the television set has 4 or 5 keys located on the front or the top of the set.The VOLUME (-”+) keys are used to adjust the sound levels.The PROGRAM (- P +) keys are used to select the required programmes. The M /MENU key (for 5 key versions), allows you to select Volume, Brightness, Colour and Contrast.Then use the P - + to make the adjustment.

Note: when the Childlock function is activated, these keys are unavailable (see page 6).