Testing Learned Remote Control Functions, Vcr

TESTING LEARNED REMOTE CONTROL FUNCTIONS

After the remote control functions of accessory devices have been

learned by M-Link™ , you can test whether the functions shown on the screen are being correctly carried out by the accessory device.

Press the M LINK button on your TV remote control to enter the M-Link™menu.

Press the CURSOR RIGHT button repeatedly until the name of the device whose functions you want to test (VCR or DVD, for example) is highlighted.

Press the CURSOR DOWN or CURSOR UP button repeatedly until the name of the function you want to test is highlighted.

Press the CURSOR LEFT or CURSOR RIGHT button to acti-

VCR-AV3

CH3

CHI

VCR

POWER/STBY

SAP

SPEED

SLOW

SLEEP

POWER

PIP

TV/VCR ON/OFF POSITION FREEZE

A/CH

SWAP

SOURCE

PIP CH

UP DN

VCR-AV3

VCR

POWER/STBY

SAP

SPEED

SLOW

VCR-AV3

VCR

POWER/STBY

SAP

SPEED

SLOW

vate the highlighted function.

NOTE: If the device did not respond to the command to perform the function in step 4, go back to either the section on “Setting Up a Philips Device” or “Setting Up a

SOUNDPICTURE

MENU M LINK

POWER ON

New or Multibrand Device” and perform the steps again.

If the device performed the POWER/STBY function, press the CURSOR DOWN button to high- light other functions (MENU, SPEED, SLOW, etc.). Then press the CURSOR RIGHT button to activate each function and check whether the device performs the function.

Press the M LINK button on your TV’s remote control to remove the M-Link™menu from the screen.

VOL			CH
	MUTE
5 3 URCE STATUS/EXIT		CC	CLOCK
ITR/REC	HOME	HOME	PERSONAL
	VIDEO	MOVIES
INCR. SURR.			SURF
PROGRAM LIST	OPEN/CLOSE		TUNER A/B
OK

2 4

SMART HELP

When you are setting up a New or Multibrand device, you must

ensure that you are pressing the correct buttons on the device’s remote control to match with the corresponding function in the M-Link™LEARN menu.

Different codes have sometimes been used for the same function among Philips accessory devices. If M-Link™will not operate the functions of a Philips acces- sory device, you may need to delete the device from M-Link™using the onscreen menu, and then explore the functions of the Philips accessory device using its remote control. Follow the steps under “Setting up a New or Multibrand Accessory Device” to have M-Link™learn the remote functions.