GETTING STARTED
Connecting the antenna
•Connect the aerial plug to the antenna socket on the backcover.
•Insert the mains plug into the wall socket.
Connecting the mains
•For correct mains voltage, refer to type sticker at the rear of the TV set
• Consult your dealer if mains supply is different. Note :This diagram is not representative of the actual plug and socket.
Switching on the set
•Press the main power button to switch on/ off theTV.
•If the set is on standby (indicator is lit), press the Power button on the remote
control to switch on set.
Disconnecting from the mains
•The mains switch . on the TV is used as a dis- connecting device.
Installing the remote control batteries
• Insert the correct type of batteries into the compartment.
• Ensure the batteries are placed in the right direction.
5