Philips PRF227S DFU, 3135-125-20871 manual Introduction

PLW225S & PRF227S DFU	# 3135-125-20871	PRELIMINARY 04/15/02
	INTRODUCTION

Philips Institutional TV Software

Your Philips Institutional Television can be configured to operate in either "Consumer" or "Commercial" operational modes.

Commercial Mode: Your Philips Institutional Television is configured at the Factory to operate in Commercial mode. When the television is in Commercial mode, access to its operation from its front panel controls or from a guest-mode remote can be limited, depending upon the settings of the Institutional TV features. For examples, the unit’s front panel controls can be “locked-out” (rendered inoperable), only certain channels can be selected, and/or the volume can be lim- ited to a given range.

Consumer Mode: When in the Consumer mode, the unit operates as a standard TV, bypassing the Institutional Television feature set, thus allowing normal initial power ON, channel selection, and volume control (as well as a vari- ety of selectable Menu features). When the TV is in Consumer mode, Philips RC-5 system 0 (guest-mode) remotes, such as the RC2524BK and the RL9820BK (optional accessories) can access the Consumer-mode Main Menu, and configure the television to the full extent offered in this mode. Guest-mode 21-button remotes such as the RC2524BK use the Menu button to access the Consumer menu. Guest-mode 20-button remotes such as the RL9820BK, which do not have a Menu button, use the Sleep button to access the Consumer menu. Simultaneously pressing the front panel’s Volume - and Volume + buttons also invokes the Consumer menu.

Identifying the Operational Mode: To identify the television’s operational mode, a system 7 (commercial setup mode) master setup remote (RG4172BK, optional accessory) must be used. With the RG4172BK in setup mode (press TV SETUP on the RG4172BK), press Recall. The following information will appear on-screen:

STATUS ITEM		STATUS DATA	MEANING
SYSTEM STATUS (LO1ITV-US4PV)	n/a		Information title
MODE	COMMERCIAL / CONSUMER		Operational mode
CHANNEL	CHANNEL, INPUT (CHANNEL, INPUT)		Currently-tuned channel
DCM	OFF	/ ON	Data communications module offline /
			online
CODES	211	222 001 035	Internal data for factory / service use.
SIGNAL	TUNED / NOT TUNED		Signal present / absent
OP HRS	0031h		Number of cumulative hours unit has
			been operated (hexadecimal)
ERRORS	0 0 0 0 0		Internal data for factory / service use.
VERSION	3.3		Television software version.

Changing Operational Modes: To change the television’s mode between Consumer and Commercial modes, a system 7 (commercial setup mode) master setup remote must be used. With the RG4172BK in setup mode (press TV SETUP on the RG4172BK), enter the following keystroke sequence: 0 2 4 9 9 5 Menu. Only the RG4172BK, when it is in setup mode can change the television’s mode between Consumer and Commercial, and provide complete access to the televi- sion’s Institutional Features. The RG4172BK can be set to operate in either its master setup remote mode, or in guest- mode. The RG4172BK’s guest mode facilitates testing the desired Institutional / Commercial configuration.

3