PLW225S & PRF227S DFU | # | PRELIMINARY 04/15/02 |
SETTING THE INSTITUTIONAL TV OPERATIONAL MODE
To change the operational mode of the Philips Institutional TV, use the RG4172BK in setup mode (press TV SETUP on the RG4172BK), and enter the following keystroke sequence: 0 2 4 9 9 5 Menu. Select the desired mode from the Operational Mode menu. IMPORTANT NOTE: IF YOU CHANGE THE OPERATIONAL MODE TO CONSUMER MODE,
YOU MUST POWER THE TELEVISION OFF AND BACK ON TO COMPLETE THE MODE CHANGE.
NOTE: ONCE THE TELEVISION IS IN CONSUMER MODE, DO NOT USE THE SETUP REMOTE TO ACTIVATE COMMER- CIAL FEATURES. OTHERWISE, THE COMMERCIAL FEATURES WILL AFFECT CONSUMER OPERATION. IT WILL THEN BE NECESSARY TO PLACE THE TELEVISION BACK INTO COMMERCIAL MODE, THEN INTO CONSUMER MODE, AND THEN POWERED OFF AGAIN TO PROPERLY PLACE THE TELEVISION BACK INTO CONSUMER MODE.
OPERATIONAL MODE
CURRENT MODE | COMMERCIAL / CONSUMER | |
|
| |
CONSUMER MODE: | PRESS 1 | |
|
|
|
COMMERCIAL MODE: | PRESS | 2 |
|
|
|
EXIT WITHOUT CHANGING MODES: | PRESS | 0 |
|
|
|
PHILIPS INSTITUTIONAL TV REMOTE CONTROLS
Remote controls (optional accessories) used with Philips Institutional televisions.
RC2524BK | RL9820B | RG4172BK |
| ||
Guest Remote | Guest Remote | Setup Remote |
| ||
Master setup | remote. | ||||
with menu button, addi- |
| Required | to | change | |
tional features (VCR con- |
| operational | modes | and | |
trol, etc.) |
| access Institutional fea- | |||
|
| tures. Press TV SETUP | |||
|
| to place | remote | in | |
|
| SETUP mode. |
|
| |
RC2573* Future version of mas- ter setup remote. Fully functionally equivalent to RG4172BK. Put switch in SETUP posi- tion to place remote in setup mode. *Exact model number subject to change.
4