Philips 47PF9541/93 Connect a VCR or DVD recorder, Connect the RF Antenna cable 1 to the RF

2569.1 en 08-11-2006 12:21 Pagina 37

Connect a VCR or DVD recorder EN

Warning: do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum distance of 0,5 m from the screen.

1. Connect the RF Antenna cable 1 to the RF

								IN socket of your recorder.
		H	Pr	L				2. Connect another RF cable 2 from the output
			/R
				AUDIO				OUT of your recorder to the TV’s input
		V	Pb	R
			/B
		VIDEO						CABLE/ANTENNA 75 ø x jack.
			/G
			Y					3. Better playback quality can be obtained if
		via RGB-HV	AV1	DIGITAL
		VGA (PC)		AUDIO
				IN
		S-VIDEO	VIDEO	AV3				you also connect the Video,Audio Left and
					Pr		CABLE
								Right (only for stereo devices) AV cables
			L	Pb
		S-VIDEO	AUDIO			3		3 to the VIDEO, AUDIO L and R input
		AV2	R		Y			jacks of AV2.
o	o	L o AUDIO o R		o	MONITOR			If your recorder has an S-VHS video
75
ANTENNA 75	DIGITAL AUDIO OUT	DISPLAY SYNCHRONIZED VIDEO			OUT			jack:

AV2 :

L + R + VIDEO

OUT

OUT IN

RECORDER

For improved picture quality, connect an S-video cable with the s-video input instead of connecting the recorder to the VIDEO jack of AV2.

S-Video does not provide audio, so audio cables must still be connected to provide sound.

Note:

-When using the S-VIDEOconnector do not connect any device to the AV2 VIDEO or AV1 VIDEO input.

37