Philips SX60 user manual Troubleshooting

11	Troubleshooting
Symptom		Possible cause/Remedy
No picture		• Verify if the supplied cables are connected properly. (The aerial cable to
		TV, the other aerial to your recorder, the power cables, ..)
		• Verify if you selected the correct source.
		• Verify if the child lock has been switched off.
Poor picture		• Verify in the Manual installation menu if you have selected the correct
		TV system.
		• Verify if your TV or house aerial isn't located too close to loudspeakers,
		non-earthed audio equipment or neon lights, etc.
		• Mountains or high buildings can cause double pictures or ghost images.
		• Sometimes you can improve the picture quality by changing the direction
		of the aerial.
		• Is the picture or teletext unrecognisable or do you experience bad
		teletext reception? Verify if you have entered the correct frequency, or
		fine tune the frequency for that specific channel or adjust the antenna
		direction if the problem isn’t solved by finetuning. See Installation menu,
		Manual installation, p. 24.
Poor colour		• Select Factory settings in the Installation menu.
		• Verify the connections between the optional equipment and the TV.
No sound		• Verify if the volume isn't at minimum.
		• Verify if the sound hasn't been muted with the ¬ key.
		• Verify the connections between the optional equipment and the TV.
The remote		• Verify if the remote control is set correctly for the equipment your are
control does not		using.
work		• Verify if the batteries are not dead. Replace the batteries.
		You can still use the keys at the left side of the TV.
The remote		• The infrared signals of the screen may influence the reception sensibility
control of		of other peripherals.
connected		• Solution: replace the batteries of the remote of other peripheral
equipment does		equipment.
not work well
Occasional		• The sympton is not a problem.
appearance of		The liquid crystal panel is built with very high precision technology giving
red, blue, green,		you the fine picture details. Occassionally a few non-active pixels may
and black spots		appear on the screen as a fixed point of red, blue, green, or black. Note
on screen		that this does not affect the performance of the set.

44