Stereo amplifier and two extra front speakers
& Connect the audio cables to the AUDIO input of your amplifier and to AUDIO L and R at the back of your TV.
é The output level is controlled by the volume control of the amplifier.
AUDIO
Note: Switch off the TV and your audio amplifier before connecting them. Set the audio amplifier’s volume to minimum.
To select connected equipment
Press the v key on the remote control repeatedly to select EXT1, EXT2 or SIDE according to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Cinema Link surround receiver
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can be operated with the remote control via the Recorder or DVD menu on screen.
Recorder
Òp ‡ π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
DVD 
Òp ‡ π † Ï
Prev. Play Stop Play Next Eject
&Press the MENU key on the remote control.
éSelect the Recorder or DVD menu with the cursor up/down.
“Press the cursor left/right, up/down to select one of the recorder or DVD functions.
16