Set/Change code
The Child lock feature (see TV, Features, p. 11) allows you to lock channels to prevent others from watching certain programmes.To watch locked channels, a
&Select Set/Change code.
éIf no code exists yet, the menu item is set to Set code.
If a code has previously been entered, the menu item is set to Change code. Follow the instructions on screen.
Important:You have forgotten your code !
&Select Change code in the General menu and press OK.
éPress the cursor right and enter the overriding code
“Press the cursor again and enter a new personal
Source Source
Setup
EXT1
EXT2
SIDE
Centre input
This menu allows you to indicate the peripheral you connected to one of the external inputs.
&Press the cursor right to enter the list of types of peripherals attached to the selected input.
éSelect the peripheral device with the cursor up/down.
Once you have selected the source type, e.g. DVD, this source will automatically be selected when your remote control is in DVD mode, see p. 3, and when you press the v key on the remote control.
Centre input
When you have connected a Cinema Link surround receiver to the TV (See separate Cinema Link instruction manual supplied) and you have selected EXT1 as centre input, the loudspeakers of the TV will act as centre speaker, making a separate centre speaker unnecessary.
Decoder
Decoder
Setup 
Programme
Status
If a decoder or a descrambler is connected, see p. 15, you can define one or more programme numbers as decoder programme numbers.
&Select Decoder with the cursor right.
éSelect Programme.
“Select the programme number under which you have stored the programme coming from your decoder.
‘Select Status.
•Select the input used to connect your decoder: None, EXT1 or EXT2.
•Select None if you do not want the selected programme number being activated as a decoder programme number.
Note: Select EXT2 when the decoder is connected to your EasyLink video recorder.
Demo
TV |
|
Setup |
|
Demo | Auto demo |
Install | ...... |
|
Dealer demo - Digital options - Light sensor
- Comb filter
The Demo menu allows to demonstrate the TV features separately or in a continuous loop.
If Auto demo has been selected the demo will automatically present the features sequentially in a loop. Press one of the cursor keys to stop the Auto demo.
If one of the features has been selected, this particular feature demo will run only once, and the Demo menu will reappear.
Note:The Dealer demo is not part of the automatic sequence and can only be activated separately.
8