Esp Zappa 1333.3 GB only 1/9/06 2:52 PM Page 12
Tips
Poor reception
The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your picture: see Fine Tuning (p.5) or modify the orientation of the outside aerial.
Does your antenna enable you to receive broadcasts in this frequency range (UHF or VHF band)?
In the event of difficult reception (snowy picture) switch the Dynamic NR on the Features menu to ON. (p. 6).
No picture
If the television does not switch on, please press the standby key b (located on the remote control) twice.
Have you connected the aerial socket properly? Have you chosen the right system? (p. 5). Poorly connected euroconnector cables or aerial sockets are often the cause of picture or sound problems (sometimes the connectors can become half disconnected if the TV set is moved or turned). Check all connections.
Peripheral equipment gives a black and white picture
To play a video cassette, check that it has been recorded under the same standard (PAL, SECAM, NTSC) which can be replayed by the video recorder.
The remote control no longer works
Check that the mode selector on the side of the remote control is set to TV.
No sound
If on certain channels you receive a picture but no sound, this means that you do not have the correct TV system. Modify the System setting (p. 5).
Teletext
Are certain characters not displayed correctly? Check that the Country setting has been positioned correctly (p.5).
Remote control
The TV set does not react to the remote control; the indicator on the set no longer flashes when you use the remote control? Replace the batteries.
Standby
When you switch the TV set on it remains in standby mode and the indication Locked is displayed when you use the keys on the TV set?
The Child Lock function is switched On (p. 7). If the set receives no signal for 15 mins, it automatically goes into standby mode.
In
Still no results ?
If your TV set breaks down, never attempt to repair it yourself: contact your dealer's after- sales service.
Cleaning the set
Only use a clean, soft and
Safety Information: Electric, Magnetic and Electromagnetic Fields (“EMF”)
1.Philips Royal Electronics manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electro magnetic signals.
2.One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF stan- dards applicable at the time of producing the products.
3.Philips is committed to develop, produce and market products that cause no adverse health effects.
4.Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.
5.Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products.
12