C2
--Vour television comes with an
I onscreen clock. During normal operation the clock appears on the screen when the STATUS/EXIT but- ton is pressed or when channel changes occur
<_ Press the CLOCK button on the remote to display the onscreen CLOCK menu.
<_;_ Press the CURSOR UP • OR CURSOR DOWN • buttons until the words SET CLOCK are high-
ghted,
<_ Enter the current time using the NUMBERED buttons. If the first number is a single digit first enter a zero then the di,g,lt (i.e., press "0 , then press 8 ).
@Press the CURSOR RIGHT • or CURSOR LEVI" • buttons to set either AM or PM time.
Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU button; then scrolling up/down with the CURSOR UP • or CURSOR DOWN • buttons until
the word CLOCK is highlighted. Press the CURSOR RIGHT • button to activate the CLOCK
menu and follow the steps above to set the time.
@
Remember: Be sure to
tli press "0" first and then the
hour number for single digit entries.
To clear the onscreen menu press the STATUS/EXIT button or wait a
few seconds after you have finished
your adjustment and the menu will automatically disappear from the
screen.
[SET OJXX
qlMER ACTIVE | ON |
CHANNEL12
ISETCt_0CK 10:00 AMI
TIMERACTME ON
CHANNEL12
|
| TVts CLOCK will have to be reset. |
|
| If no time is set, the time will not |
|
| Note: If a power failure occurs, the |
|
| appear oascreen. |
|
| Note: The CLOCK onscreen menu can |
• tram | _m | also be accessed throughthe main menu |
©© |
| by pressing the MENU button; then |
lotto | _ | scrolling up/down with the CURSOR |
|
| |
|
| UP • or CURSOR DOWN • buttons |
|
| until the word CLOCK is highlighted. |
|
| Press the CURSOR RIGHT • button |
|
| to activatethe CLOCK menuand follow |
|
| the steps above to set the time. |
18