FJzaaatl. d y | Philips PRI39IXI instruction

please make these simple checks before calling for ser-

vice. These tips can save you time and money since charges for TV

installation and adjustment of customer controls are not covered under your warranty.

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen, can cause picture tube damage. When your TV is continuously used with such a source the pattern of the non-moving portion of the game (CDI, etc.) could leave an image permanently on the picture tube. When not in use, turn the video source OFF. Regularly alternate the use of such video sources with normal TV viewing.

No Power

No Picture

No Sound

i Checkoutlet	andthe TVpushpowerPOWERcordbutton.Unplugagainthe. TV, wait		10 seconds, then reinsert plug into			] 1
Check	that outlet is not on a wall switch. Be sure		fuse	is not blown on AC Power	strip. ]
Check	antenna connections.	Are they properly secured		to the TV's ANT/CABLE	plug?	i
Check	the TUNER control	for CABLE or ANTENNA		setting.		I

_ Check	the VOLUME buttons.					i
Check	the MUTE button on the remote control.

Remote Does Not

Work

Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries if necessary.

Clean the remote and the remote sensor window on the TV.

Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into

outlet and push POWER button again. Be sure fuse is not blown on AC Power strip. Check to be sure TV outlet is not on a wall switch.

TV Disnlavs Wron

Channel or N9

FJzaaatl. d y.

Add desired channel numbers (CHANNEL control) into TV memory.		i
i epeat	channel selection.
Check	to be sure the TUNER control is set to the CABLE option.

Cleanin_ and Care

•To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

•When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.

•Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean dry cloth to dry the wiped surfaces.

•Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.