Philips PR1920C6 manual Setting the TV’S Clock, Press the Clock button on

Your television comes with an onscreen clock. During normal

operation the clock appears on the screen when the STATUS/EXIT but- ton is pressed or when channel changes occur.

BEGIN

Press the CLOCK button on

the remote to display the onscreen CLOCK menu.

Press the CURSOR UP ▲ OR CURSOR DOWN ▼ buttons until the words SET CLOCK are high-

lighted.

Enter the current time using the NUMBERED buttons. If the first number is a single digit first enter a zero then the digit (i.e.,

SETTING THE TV’S CLOCK

SET CLOCK	- - :- - AM
TIMER ACTIVE	ON
CHANNEL	12

SET CLOCK	10:00 AM
TIMER ACTIVE	ON
CHANNEL	12

press “0”, then press “8”).

Press the CURSOR RIGHT ▶ or CURSOR LEFT ◀ buttons to

set either AM or PM time.

Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU

button; then scrolling up/down with the CURSOR UP ▲ or CURSOR DOWN ▼ buttons until

the word CLOCK is highlighted.

Press the CURSOR RIGHT ▶

button to activate the CLOCK menu and follow the steps above to set the time.

SMART HELP

Remember: Be sure to press “0” first and then the

hour number for single digit entries.

To clear the onscreen menu press the STATUS/EXIT button or wait a few seconds after you have fin- ished your adjustment and the menu will automatically disappear from the screen.

1

CC CLOCK SLEEP

3 1 2 3

4	5	6
7	8	9
A/CH	0	2
		SURF
		STATUS
MENU		EXIT

4

VOL CH

MUTE

SMART SMART

SOUND PICTURE

Note: If a power failure occurs, the TV's CLOCK will have to be reset.

If no time is set, the time will not appear onscreen.

Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU button; then scrolling up/down with the CURSOR UP ▲ or CURSOR DOWN ▼ buttons until the word CLOCK is highlighted. Press the CURSOR RIGHT ▶ button

to activate the CLOCK menu and follow the steps above to set the time.

18