Philips PR1920C6 manual Understanding the Smartlock C Ontrol Block Channel, Clear ALL

UNDERSTANDING THE SMARTLOCK™ C ONTROL (BLOCK CHANNEL)

After your personal access code has been set (see previous

page), you are now ready to select the channels you want to block out or censor.

BEGIN

Press the MENU button on the remote to show the onscreen menu.

Press the CURSOR UP ▲ or CURSOR DOWN ▼ button until the words SmartLock are highlight- ed.

Press the CURSOR RIGHT

▶button to display the SmartLock Access screen.

Enter the correct access code number. “XXXX” shows on the Access Code display as you press the NUMBERED buttons.

Press the CURSOR UP ▲ or DOWN ▼ buttons until the word BLOCK is highlighted. Press the CURSOR RIGHT ▶ button then highlight CHANNELS BLOCKED.

Press the CURSOR RIGHT ▶ button. Three options will be dis- played; CHANNEL, LOCK or

CLEAR ALL.

With CHANNEL highlighted, use the NUMBERED buttons to enter the channel number you wish to block.

Use the CURSOR DOWN ▼ button to highlight the word LOCK, then press the CURSOR RIGHT ▶ button to select YES (block) or NO (do not block). The channel chosen is now blocked from viewing.

Repeat steps 7 and 8 for any other channels you wish to block from viewing.

To clear blocked channels

follow the steps below:

Press the CURSOR DOWN ▼ button until the words CLEAR ALL are highlighted, then press the CURSOR RIGHT ▶ button.

The screen will read “ALL UNBLOCKED” for a moment. At this point ALL the previously blocked channels will be unblocked.

INPUT	▶
SLEEPTIMER	OFF	SmartLock
SmartLock	▶
CLOCK	▶
CC	OFF	ACCESS CODE
		_	_ _ _

POWER

								SmartLock
		CC	CLOCK		SLEEP	7
		1		2	4
					3			ACCESS CODE
		4		5	6
								X X X X
1		7		8	9
		A/CH		0	SURF 2
				STATUS
		MENU			EXIT
							BLOCK		▶
							CHANGE CODE		▶
						3
		5			CH	6
	8		MUTE
			SMART	SMART
			SOUND	PICTURE				BLOCKING OPTIONS	▶
								CHANNELS BLOCKED ▶
								MOVIE RATINGS	▶
								PARENTAL GUIDELINE ▶
								CHANNEL 5 BLOCKED
					CHANNEL		5	BY CHANNEL BLOCKING
								ENTER CODE TO VIEW
					LOCK		YES
CHANNEL		5						_ _	_ _
					CLEAR ALL
LOCK		NO					▶
CLEAR ALL		▶

When a blocked channel is viewed, this is what the screen will display. To view the blocked channel, sim- ply enter the current access code. Note: Once the access code is entered ALL blocked channels will be viewable until the TV is powered off. Once the set is turned off and then back on the previously blocked channels will again be blocked.

				Note: When the CLEAR
CHANNEL	5	CHANNEL	ALL	ALL option is selected, the
LOCK	YES	LOCK	NO	CHANNEL option will dis-
				play ALL.
CLEAR ALL	▶	ALL UNLOCKED		If at this point if you change
				the LOCK option to YES,
				ALL channels will be blocked
				from viewing.

25