BDL5551EL
•IP address
•Subnet mask
•Default gateway
•Login user name (The default user name is {admin})
•Login password (The default password is {0000})
Configuration reset
Reset all settings in Configuration1 menu to the factory preset values.
Factory reset
Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP}, {Configuration1}, {Configuration2}, and {Advanced option} to the factory preset values.
Press [
] or [ ] button to select [Reset], and then press [SET] button to do the reset.
Monitor information
Shows information about your display, including model number, serial number, operating hours and software version.
Monitor information
Model name: | BDL5551EL |
Serial no: |
|
Operation hours: | 0 H 3M |
SW Version: | VER 0.204 |
4.2.7. Advanced option menu
Factory reset
Cancel |
| Reset |
|
|
|
4.2.6. Configuration2 menu
Picture
Screen
Audio
PIP
Configuration1
Configuration2
Input resolution HDMI clock threshold Black level expansion Gamma selection Scan mode
Scan conversion
Film mode
IR control Keyboard control Tiling
Picture
Screen
Audio
PIP
Configuration1
OSD turn off
Information OSD
Off timer
OSD
OSD
Monitor information
Advanced option
Heat status
Input resolution
Set the resolution of the VGA input.This is only required when the display is unable to detect the VGA input resolution correctly.
NOTE: This item is functional for VGA input only.
Configuration2
Advanced option
OSD turn off
Set the period of time the OSD
The options are: {5 ~ 120} seconds.
Information OSD
Set the period of time the information OSD is displayed on the upper right corner of the screen.The information OSD will display when input signal is changed.
The information OSD will remain on the screen with {Off} selection. The options are: {1 ~ 60} seconds.
Off Timer
Set the display to turn itself off to standby mode within an amount of time specified.
The options are: {Off, 1 ~ 24} hours from currrent time.
NOTE: When the “Off timer” is activated, the “Schedule” settings will be disabled.
OSD
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
The options are:
•{1024x768 / 1280x768 / 1360x768 / 1366x768}
•{1400x1050 / 1680x1050}
•{1600x1200 / 1920x1200}
•{Auto}: Determines the resolution automatically.
The selected settings will become effective after turning off the power and turning it on again.
HDMI clock threshold
Adjust HDMI link clock.
•{Min} - 800KHz.(Default)
•{Max} - 5000KHz.
Black level expansion
This feature offers deeper blacks for an even better image quality.
The options are: {Off} / {Low} / {Medium} / {High}.
NOTE: This item is functional for Video mode input only.
Gamma selection
Gamma is what controls the overall brightness of an image. Images which are not corrected properly can appear too white or too dark, so controlling the gamma properly can have a huge influence on the overall picture quality of your display.
The options are: {Native} / {2.2} / {2.4} / {S gamma}.
Scan mode
Change the display area of the image.
20