Philips CCC192AT, CCC 130AT, CCC 190AT Real-Time Counter Memory, Appear on the screen, Stop

40 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.

2		2
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
01:08 PM	STOP
CH10

SLP 1 : 23 : 45

3

While the counter remains on the screen, press the CLEAR button to reset the real-time counter to zero.

0 : 00 : 00 4

4

3

EJECT	POWER
MENU	STATUS/EXIT	CLEAR

1	2	3
4	5	6
7	8	9
SLEEP/		ALT.CH
WAKE UP	0
REC		PAUSE
/OTR		/STILL

PLAY

REW F.FWD

STOP

CH.VOL.

MUTE

SPEED

TRACKING MEMORY

While the counter remains on the screen, press the MEM- ORY button so that M appears on the screen. To erase a real-time counter memory, press the MEMORY button so that the M disappears from the screen.

M 0 : 00 : 00

5

To go to the tape location where you set the real-time counter to zero, press the REW(ind)/s button or the F.FWD/B button when playback is stopped. When the tape reaches the point at which you set the counter to zero, the tape will stop. Press the PLAY/o button to watch the tape.

1,5

Helpful Hints

•The real-time counter memory will not function during Repeat Play mode. Details are on page 37.

•You may only set one real-time counter memory at a time. If you set the real-time counter to zero at a second location, the previous real- time counter to zero setting will be lost.