Philips CCC 190AT, CCC192AT, CCC 130AT, CCC 132AT owner manual Helpful Hints

Page 54

54 Helpful Hints

If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself.

If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If the representa- tive will need to help you with operations, please stay near the product. Our representatives will be happy to assist you.

Location

For safe operation and satisfactory performance of your TV/VCR, remember the following:

•Shield it from direct sunlight and keep it away from sources of intense heat.

•Avoid dusty or humid places.

•Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.

•Avoid locations subject to strong vibrations.

•Do not place the TV/VCR near strong magnetic fields.

•Do not move the TV/VCR from a cold place to a hot place, or vice versa.

Electrical Shock and Fire Hazards

•Do not handle the power cord with wet hands.

•Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall out- let. Grasp it by the plug.

•If you spill water on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an autho- rized service center.

•Do not put your fingers or objects into the TV/VCR cassette compartment.

•Do not place anything on top of the TV/VCR.

Dew Warning (Moisture Condensation)

•Moisture may condense inside the unit when you move it from a cold place to a warm place, after heating a cold room, or when the humidity is high. There is no warning that moisture is in your TV/VCR. Playing a tape in a TV/VCR in which moisture has accumulated could damage the tape and the TV/VCR. If you sus- pect moisture inside the TV/VCR, keep the TV/VCR power on (but do not play a tape) for at least two hours. This will allow the TV/VCR to dry.

TV/VCR will not perform a timer recording.

•Set the recording start and stop times correctly. Details are on pages 32-35.Midnight is 12 a.m. Noon is 12 p.m.

•Make sure the TV/VCR power is off.

•Set the clock. Details are on pages 12-17.

•Put a tape in the TV/VCR. The tape must have a record tab.

•With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using AUTO CLOCK. Details are on pages 14-17.If you are not using AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled to take place during the power failure.

•Make sure DEFEAT RECORDING is set to OFF. Details are on page 36.

TV/VCR will not record.

•Make sure the tape has a record tab. Details are on page five.

•Make sure DEFEAT RECORDING is OFF. Details are on page 36.

•Plug the power cord into an active AC outlet. Details are on page seven.

•Check your hookups. Details are on pages six-seven.

•Set up the channels. Details are on page 10.

Channel reception is poor.

• Check connections, then set up the channels again. Details are on page 10.

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Color TV with built-in VCR This bolt of lightning indi- cates uninsulated material Dear Philips product ownerFor Customer Use Model No Serial NoIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents TV/VCR Maintenance Battery SafetyUsing the Remote Control Replace the battery compartment lidRF coaxial cable Not supplied Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Rod AntennaCrooked Pin Straight Pin Hooking Up the TV/VCR cont’dBent pin Cable PlugTurning On the TV/VCR Press the Menu button. The screen shown below will appearLanguage Selection Press the Menu buttonSelect Language English Español Select KL To END Press Exit Automatic Channel Setup Wait for the TV/VCR to set up channelsRepeat steps 3-4 to add or delete other channels Adding/Deleting ChannelsPress the PLAY/o button or the STOP/p button to select Programming of the channel you added or deleted will appearSetting the Clock Manual Clock SettingCable Box users must set the clock manually Month To Correct Press Clear To END Press Exit SET Manual Clock Time Date To END Press ExitSET Manual Clock Time Date Sunday To Correct Press Clear To END Press ExitVCR Program VCR Setup Caption Reminder Brightness Setting the Clock cont’dPRIM. Setup Press B Automatic PBS Channel SelectionSET Auto Clock Time Date NOW Searching To END Press Exit NOW Searching flashes on the TV/VCR screenWait for the TV/VCR to find the time SET Auto Clock TimeManual PBS Channel Selection Use the Number buttons to select your PBS station Daylight-Savings Time PRIM. SETUP. Then, press the F.FWD/B buttonPRIM. Setup Press B VCR Program VCR Setup Press the PLAY/ button or the STOP/ button to selectTime Zone Primary SetupVolume BAR SET Clock Select KL Choose B To END Press Exit Press the Menu button, then press the STATUS/EXIT buttonFront Panel ANTenna Jack AC Power CordRear Panel Connect your antenna or cable here. Details are on page sixRemote Control Buttons REWind/ Button Menu ButtonSTATUS/EXIT Button STOP/ ButtonAdjusting the Picture Controls When you finish, press the STATUS/EXIT buttonDecrease Increase Adjusting the Picture Controls cont’dTint KK Sharpness TV Reset Decreased brightnessIf you select Status ON, then select Counter only on On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status OFFReminder OFFPlaying Follow the steps below to play a tapeInsert a tape in the TV/VCR To stop recording, press the STOP/ button Tape Speeds RecordingRead and follow the steps below to record a TV program HrsTape is in the TV/VCR. The record tab must be intact Length Press OTR Cancel Press ClearOne-Touch Recording Press the STOP/EJECT but- ton on the TV/VCR to stop the OTRTV/VCR is now in Line Input mode Rerecording Tape DuplicationTimer Recording DailySelect Program Number To END Press Exit ONE Time Program Channel Time on Time OFF To Correct Press Clear To END Press ExitTimer Recording cont’d Program REVIEW, then press the F.FWD/B button Timer recording information for the program in the lowestWith the TV/VCR on, press the Menu button Gram Review and press the F.FWD/B buttonFollow the steps below to prevent accidental recording VCR Setup ONE Time PlayDefeat Recording REC DefeatedRepeat Play VCR SETUP, then press the F.FWD/B buttonVCR Setup ONE Time Play Repeat Play on TV programming will appear while the tape is rewindingVCR Setup ONE Time Play Repeat Play A-B B Repeat PlayInsert a tape in the TV/VCR Press the Menu button Repeat Play cont’d RepeatReal-Time Counter Memory Appear on the screenStop Forward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPViewing a Still Picture SmartLock To block ratings, follow the steps belowSmartlock menu will appear SmartLock cont’d Ratings are defined onExample Specific Sub-ratings To change the access code, follow these steps After you enter the code, the Smartlock menu will appearBlocked Ratings TV-Y7 TV-GVCR Program VCR Setup Caption Reminder Blue BackgroundSleep Timer Timer during a recordingPress the SLEEP/WAKE UP button Wake Up Timer Timer Sleep Wake UP TV on ON-TIMETimer Sleep Wake UP Volume Bar VCR Program VCR Setup CaptionExample To Adjust Press / B CaptionClosed Caption Menu ScreenClosed Caption cont’d Standard Closed CaptionsHalf-screen text Automatic Operation Features Glossary Helpful Hints Helpful Hints cont’d Specifications Limited Warranty Please contact Philips at French Speaking English SpeakingModel # Serial # Index Page Supplied Accessories
Top Page Image Contents