Philips BDS46622R user manual OSD Functions

User Manual BDS4622V/R and BDS4624R

8.2.9OSD FUNCTIONS

A)TV Settings

1Press the MENU button.

2Press the PR or PR button to Select.

3Press the VOL- or VOL+ button to execute, then the TV Settings will come out as the left figure below.

Auto Install

There are 3 systems: Europe; France and All Region.

1Select Auto Install row.

2Press the VOL+ button to enter the select system.

3Press the ENTER button to start the channel scanning.

The OSD menu will change into Channel Search.

Upon completion of the channel scan it will stay on the channel where the auto process started.

The active channels are stored into the channel memory.

4Press the PR or PR button to select channel in sequence.

5Press the EXIT button to stop searching.

Manual Search

1 Press the VOL+ button to set up TV Channels manually.

Fine Tune

1Fine tune range cover -5 ~ +5 MHz of the currently displayed program channel, 62.5 khz per step.

2Press the VOL- or VOL+ button to adjust the frequency.

Skip

Processing channel adding and erasing from tuner memory.

Select the channel first, then press the VOL- or VOL+ button to select "On" for channel erasing or "Off" for channel adding.

Note:

To erase a channel from the memory you must select a channel with the

numeric keys only, not by the PR or PR button.

41