Reshuffle the programme list
You can change the order of the stored TV channels.
&Select Reshuffle in the Installation menu.
éFollow the instructions on screen.
Select Favourite TV channels
&Select Favourite programmes in the Install menu.
éSelect your programme number with the cursor up/down.
“Select Yes or No with the cursor right.
‘Repeat é and “ for every TV channel or external you want to make a favourite or a
TV Setup
Speakers General Source Decoder
Setup 
Test tone 
Balance 
Centre volume 
(Surround volume) 
Surround speakers 
Auto surround 
The Setup menu contains items that control the settings of the TV’s functions, features, services and peripherals you may have connected.
The Speakers menu reflects the
The General menu allows you to change settings that will typically be accessed only occasionally. The Source menu allows you to select a source. The Decoder menu allows you to define one or more programme numbers as decoder programme numbers.
Speakers
Your TV is equipped with integrated front left, right and centre loudspeakers, capable of reproducing Stereo, Dolby 3 stereo and 3D Surround modes. For full Dolby Pro Logic Surround sound you should use two amplified rear surround speakers connected to the back of the TV.
See Extra loudspeakers/Amplifier, p. 21.
Depending on the output and Surround mode (see Main menu,TV, Sound, Surround mode, p. 12) selected, some menu items may be greyed out and are not selectable.
Test tone controls
The menu item Test tone enables you to balance the volume levels of the speakers.
&Select Test tone and press the cursor right.
éOnce turned on, the Test Tone will circulate through the left, centre, right speakers and both rear surround speakers (if present).
“Press the cursor up/down to select the desired speaker for individual volume level adjustment.
‘Press the cursor left/right to adjust the volume level.
Surround Speakers
See Connect Peripheral Equipment, Extra loudspeakers/amplifier, p. 21.
If no Surround Speakers are connected do not change the predefined factory settings which is Off. If Surround Speakers are connected select On.
(Dolby Pro Logic and Hall are not available if Off is selected.)
Auto Surround
Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes.
The TV automatically switches to the best surround sound mode when Auto Surround is switched On.
However it is possible to overwrite this setting.
8