Philips VRX775VD manual Hooking UP Your TV Basic Antenna TV Connections

Page 6

HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)

Acombination antenna receives normal broadcast channels

(VHF 2-13 and UHF 14-69). Your connection is easy since there is only one 75Ω (ohm) antenna plug on the back of your TV - and that’s where the antenna goes.

If your antenna has a round cable

(75 ohm) on the end, then you're ready to connect it to the TV.

If your antenna has flat twin-lead wire

(300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.

Push the round end of the adapter (or antenna) onto the 75Ω plug on the rear of the TV. If the round end of the antenna wire is threaded, screw it down finger tight.

Note: For homes with separate UHF and VHF antennas you will need an optional combiner to connect to the TV.

U/V

Combiner

Back of TV

75-300 Ohm Adapter

SMART HELP

Remember: Be sure to set the TV for the type signal you've

connected (see the “Tuner Mode” sec- tion on page 11 of this manual.)

To set the TV to select only the channel numbers in your area see how to “Program" or "Add" channels in the TV’s memory on page 12 (Auto Program section).

To order any optional accessory contact your dealer or the Philips Parts Center at 1-800-851-8885.

Combination VHF/UHF

Antenna

(Outdoor or Indoor)

75 V

1

300 to 75Ω

2

 

 

Adapter

 

 

 

75 V

Twin Lead

 

Back of TV

Wire

 

 

 

OR

 

Round Cable 75Ω

6

Image 6
Contents For fast help, call us first Warranty Verification Important Safety Instructions Table of Contents If you have a Cable Converter Box If your Cable TV signal is a singleHooking UP Your TV Basic Cable TV Connections Connect the Cable TV cable toIf your antenna has a round cable If your antenna has flat twin-lead wireHooking UP Your TV Basic Antenna TV Connections Ohm on the end, then youre ready to connect it to the TVFront A/V Inputs Connect your Antenna or Cable TV signal to the in fromHooking UP Your TV Basic TV to VCR Connections Connect the yellow video cable fromBasic TV/REMOTE Operations Television RemoteDescription of Remote Control Buttons Press the Cursor UP or When finished, press the StatusPress the Menu button on Press the Cursor RightHOW to USE the Tuner Mode Control Cable , or Auto modeHOW to Automatically Program TV Channels CH + or buttons you wish to add Scroll down using the CursorWith the Channel Edit Options displayed , and Channel If on is selected the channel isPress the Menu button on HOW to USE the Picture Adjustment ControlsWhen finished, press the Status Press Cursor UP or DownPress the Cursor UP or HOW to USE the DNR Noise Reduction ControlButton turn the DNR feature on or OFF Press the Cursor RightPress the Cursor UP or CUR HOW to USE the Contrast + Black Stretch ControlButton turn the Contrast + feature SOR Down button until the wordPress the Cursor UP or Cursor Down button to scroll HOW to SET the Bass and Treble Boost ControlsSound menu features until Words Bass Boost or TrebleHOW to USE the AVL Automatic Volume Leveler Control Press the Cursor UP or CUR SOR Down button until the wordPress the Cursor UP or CUR SOR Down button to scroll HOW to the Timer Controls Press the Clock button onOver the next few pages you’ll learn how to block channels Understanding the Autolock ControlsSetting UP the Autolock Access Code View a tuned channel that is HOW to Block ChannelsEnter your Access Code to Blocked with Block ChannelHOW to Clear ALL Blocked Chanels AT the Same Time HOW to Block ALL Channels AT the Same Time Blocking Programming Based on Movie Ratings Press the Cursor UP or Down button until AutoLock isBlocking Programming Based on TV Ratings Down button to highlight the desired ratingTV Ratings Rating Sub-Menus Using the Autolock Blocking Options Blocking OptionsHOW to USE the Closed Caption Control Press the Sleep button on Press the Sleep button repeatedlySetting the Auto Picture Control Press the Auto Picture buttonSetting the Auto Sound Control Press the Auto Sound button onPress the Auto Sound button Press the Smiley Button on While the Smiley face channel Indicator is displayed, pressPress the Channel + or but Press the corresponding COL Ored Red, Green, Yellow or BlueUsing the Quadra Surf Buttons Repeatedly pressing the same COLFrownie face button will allow you Troubleshooting Tips TV Displays Wrong Channel or No Channels AboveGlossary to Television Terms Index Renewed