Philips XA311 manual HOW to USE the DNR Noise Reduction Control

HOW TO USE THE DNR (NOISE REDUCTION) CONTROL

or reasons such as poor cable recep-
Ftion, the picture can sometime
appear slightly “speckled” (or has signal
noise shown in the picture). The DNR
(Dynamic Noise Reduction) control can
help eliminate this type of interference	Main
and improve the quality of the picture.
	Picture	Brightness
	Sound	Color
Press the MENU button on the	Features	Picture		Picture
	Install	Sharpness
				Brightness	50
remote to display the on-screen menu.
		Tint		Color
		More...
Press the CURSOR UP ▶ or CUR-				Picture
				Sharpness
SOR DOWN ■ button until the word				Tint
PICTURE is highlighted.				Color Temp.
Press the CURSOR RIGHT ▶▶
button to display the PICTURE menu
features.
Press the CURSOR UP ▶ or				Picture
		4		Color
CURSOR DOWN ■ button to scroll				Picture
the Picture menu features until the word	1	2	6	Sharpness
DNR is highlighted.				Tint
				Color Temp.
Press the CURSOR RIGHT ▶▶				DNR	On
button turn the DNR feature ON or
OFF.			3 5
When finished, press the STATUS	L			Picture
/EXIT button to remove the menu
	2
from the TV’s screen.				Color
	4			Picture
				Sharpness
				Tint
				Color Temp.
				DNR	On
SMART HELP
“Noise” Reduction is a video					OR
adjustment feature that affects the
picture quality of the TV not the sound.
NOTE: If the Sharpness control setting				Picture
is under 50 (see Picture Adjustments on				Color
the previous page), the DNR control will				Picture
				Sharpness
have little or no effect to the TV’s pic-
				Tint
ture when switched to ON.
				Color Temp.
				DNR	Off
		6