Philips TS2779C1 manual Setting the Remote Control to Work with Other Devices

SETTING THE REMOTE CONTROL TO WORK WITH OTHER DEVICES

our remote control is set to
Ywork your TV and many
infrared remote (IR) control
VCRs, Cable Boxes, Satellite
Systems, DBS, etc. However, an
easy onetime step may be neces-
sary before the remote will work			SLEEP
your VCR.	1
Try this initial check to see if			A/CH		STATUS/EXIT		CC
going on to the following section
is necessary.		TV	RECORD
BEGIN		VCR		1		2	3
Place the TV/VCR/ACC
Mode Switch in the proper posi-	VCR	ACC		4		5
tion.
Point the remote control at				7		8
the device and press the POWER
button.				SMART
						0
Does the remote turn the
device ON?
				SOUND
If YES, stop and try other func-	Satellite Receiver
tion buttons on the remote. If				POWER			2
they also work the device, then		SLEEP		ST	CLOCK
				CC
			A/CH	ATUS/EXIT
the remote is ready and no fur-					TV/VCR
			RECORD
			TV
ther steps are needed.			VCR
				ACC		SMAR
						T
					T
					SMAR	PICTURE
If NO, continue...	Cable Converter				SOUND	SURF
					MENU
							CH
						VOL	MUTE
First look up a THREE-DIGIT
remote control number for your
brand of Device before going
through the simple steps on the
following page.
Find your Three-Digit Code on
pages 33-34.
SMART HELP
Remember, if more than
one number is listed, you may
have to try more than the first Three-
Digit code given in order to locate
your Device’s remote code.
	30