Select the first character using the v / V buttons.
Shift the cursor using B buttons and select the second character using v / V buttons.
Press OK to confirm your Area Code selection, then press SYSTEM MENU to exit the menu.
Press B to move to the third level.
Use v / V to select the Area Code option.
Use v / V to select the LOCK option.
The Setup menu appears.
Press SYSTEM MENU.
Area Code
F R
When you have already entered a password; Enter a 4-digit password using the numbered but- tons to confirm the personal 4-digit security pass- word.
ip
If you make a mistake, press b repeatedly to delete password numbers one by one then correct it.
1
2
While the LOCK option is selected, press B to
3 move to the second level.
4
5
When you have not entered a password yet;
6 Enter a 4-digit password using the numbered but- tons to create a personal 4-digit security password. Enter the 4-digit password again to verify.
Area Code
Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Area Code List”, page 58.).
Rating
Set Password
Before Operation (Continued)
RECORD
Disc Record Mode
You can set the picture quality for DVD recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality).
Disc Record Mode | XP |
VCR Record Mode | SP |
VCR Record System | LP |
DV Record Audio | EP |
Auto Chapter | |
Press SYSTEM MENU.
1 The Setup menu appears.
2Use v / V to select the RECORD option.
3 While the RECORD option is selected, press B to move to the second level.
4 Use v / V to select the Disc Record Mode option.
5Press B to move to the third level.
6 | Use v / V to select a desired Record Mode |
(XP, SP, LP or EP) |
7 | Press OK to confirm your selection, then press |
SYSTEM MENU to exit the menu. |
VCR Record Mode
You can set the picture quality for VCR recording; SP (Standard Play), LP (Long Play).
Disc Record Mode | |
VCR Record Mode | SP |
VCR Record System | LP |
DV Record Audio | |
Auto Chapter | |
