Philips DVDR3320V General Explanation On-Screen Display, Displaying Information on-screen

General Explanation of

On-Screen Display

This manual gives basic instructions for operating the Recorder. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indi- cating that the operation is not permitted by the Recorder or is not available on the disc.

Displaying Information on-screen

You can display various information about the disc or tape loaded on-screen.

2or RETURN(O) repeatedly until it disappears.

See the descriptions on next pages for detailed explanation during playing.To remove the on-screen display, press DISPLAY

otes

Some discs may not provide all of the features on the on-screen display example shown on next pages.

If no button is pressed for 7 seconds, the on-screen display disappears.

Before Operation (Continued)

Changing TV Channels

If no disc or tape is playing, you can change TV chan- nels using the number or v / V buttons on the remote control, or the CHANNEL (v / V) buttons on the front panel.

Changing TV Audio Channel

Some TV programs are broadcast with a bilingual audio program (BIL). You can change the TV audio using the AUDIO button.

Press AUDIO repeatedly to change the TV audio as shown below.

Stereo/Main

Stereo/Sub

Mono/Main

English

Temporary Feedback Field Icons

Resume play from this point

Action prohibited or not available

Displaying Information While Watching TV

During viewing the TV, press DISPLAY to display/ remove the information displayed on-screen.

Indicates channel number, station name, and audio input signal received by the

tuner.

Indicates the record mode, free space, and elapsed time progress bar.

Indicates disc name and format.

Indicates output audio signal.

Indicates current date and time.

The current audio channel is displayed on-screen.

•For the detailed information, refer to the step 4 on page 44.

•If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.

•When an external input is selected, the audio channel can be switched only to Stereo.