You can play up to 32 selections in the desired order.
1 PrePQ. ..
2 Press D. SELEOT (disc skip) to move the disc tray.
:3 Choose the selection by pressing t,4<1 or li,_. (To choose a whole disc, press Ibll_, and then
1,44.)
4 Press PGM again.
5To program additional selections on a same disc, repeat steps 3 and 4.
To program additional selection on another disc, repeat steps 2, 3 and 4.
To play the pmgremmed selections
Press I_ (or I_11 on the main unit).
To return to normal play mode
Press PGM again.
Skipping to the next selection programmed
Press _ during play.
Going back to the beginning of the selection being played Press _ during play,
To program a whole disc under a single program number
Simply press the DISC SELECT button which corresponds to the disc you want. The TRACK indicator will show R, which means that all the selections on the disc have been programmed under a single program number.
To program shuffle play
Press SHUFFLE PLAY when adding an entire disc to your program. All the selections on that disc will be played in random order. Shuffle play will not affect the other selections in your program. SHUFFLE PLAY cannot be used while a program is being played. (See page 15,)
The program will be cleared in the following situations
•• ispressedduringstop.
•__is pressedduringprogramplay.
•Poweris turnedoff,
To play a selection not Included in the program
Press PGM again. PGM will disappear and you can then play another selection on a disc. This operation does not clear the programmed selections, and you can resume program play by pressing II, PGM, and then I_.
To stop program play
Press II. The last selection number programmed will be
displayed.
To resume play, press I_. Play begins from the beginning of the program.