Sony CDP-C40, CD-PC50 manual Turn off the amplifier before making connections

Page 3

•Turn off the amplifier before making connections.

•Be sure to insert the plugs firmly into the jacks. Loose connections may cause hum and noise.

•Leave a little slack in the connecting cord to allow for inadvertent shock or vibration.

•Connect the red plug of the supplied connecting cord to the right-channel jack (R) of the amplifier and the white plug to the left-channel jack (L).Otherwise, the right and left channels will be reversed.

CD player

to an AC outlet

Audio signal connecting cord (supplied)

Speaker system

Amplifier

SPEAKER

to an AC outlet

Image 3

Contents 769-921-23 CDP-C40 CDP-C50Any disc at any time Can be played using the DISCSELECTbuttonsLock the optical system Remove the customers discTurn off the amplifier before making connections Playlpause button CDP-C50 onlyOPEN/CLOSE button Stop buttonOperation Program buttonPress Disc Select Depress PowerStopping play Compartment will openThisw LiPDisc Press Corresponding Disc Select button Locating a selection in sequence Automatic MusicLocating a selection directly To play the programmed selections To return to normal play mode PressPGMagainCorresponds to the selection you want DTo program additional selections on a samePress PGM again To return to normal play mode Press PGM againTo play the pmgremmed selections Press I or I11 on the main unitFor the CDP-C50 Press Check on the remote commander E3 r-n C3 Press Shuffle PlayTo return to normal play Press Shuffle Play again Selection being To return to normal playPress Repeat reoeatedly until Repeat disappears What to be repeated Operation during Play or pauseSelect the disc to be played first with Disc Begin automatically at the preset timeCompact Disc Player Remedy Trouble