Philips BDL3220QL user manual Sound menu, Digital Crystal Clear

Page 22

BDL3220QL

Backlight contrast

Adjust the brightness of this display’s backlight.

Colour

Adjust the colour saturation of the picture.

Sharpness

Adjust the sharpness of the picture.

Noise reduction

Select the amount of noise reduction for the picture.

MPEG artifact reduction

Smoothen transitions and haziness in the digital picture.

Digital Crystal Clear

Fine-tune each pixel to match surrounding pixels and produce a brilliant, high-definition image.

{Advanced sharpness}: Enable superior sharpness, especially on lines and contours in the picture.

{Dynamic contrast}: Dynamically enhance the details in the dark, medium and light areas of the picture.

{Dynamic backlight}: Select a backlight level to optimise dynamic power consumption and picture contrast.

{Colour enhancement}: Dynamically enhance the vividness and details of colours.

Advanced

Access advanced settings such as gamma, tint settings and video contrast settings.

{Gamma}: Adjust the non-linear setting for picture luminance and contrast.

{Tint}: Change the colour balance.

{Custom tint}: Customise colour balance setting. Only available if {Tint} {Custom} is selected.

{Video contrast}: Adjust video contrast.

{Brightness}: Adjust screen brightness.

Game or computer

When viewing content from a connected game console, select {Game} to apply game settings.When a computer is connected through HDMI, select {Computer}.

Make sure that {Format and edges} {Picture format} {Unscaled} is selected so as to view maximum detail.

Format and edges

Access advanced settings to control the displaying format of the picture.

{Picture format}: Change the picture format.

{Screen edges}: Change the picture size.

{Picture shift}: If available, move the position of the picture.

5.2.2. Sound menu

Picture

Sound style

Sound

Restore style

General settings

Bass

 

Treble

 

Surround mode

 

Audio out

 

Advanced

Sound style

Access predefined sound settings.

Restore style

Restore the last-selected predefined sound setting.

Bass

Adjust the bass level of the speaker and headphones.

Treble

Adjust the treble level of the speaker and headphones.

Surround mode

Select a surround sound mode to enhance your audio experience.

Audio out

Adjust audio output volume.

Advanced

Access advanced settings to enhance your audio experience.

{Auto volume leveling}: Enable the reduction of sudden volume changes.

{Speaker settings}:Turn on or off the internal speakers.

{Clear sound}: Enhance sound quality.

{Audio out format}: Select the type of audio output through the digital audio output connector.

{Audio out leveling]: Set the output level for stereo audio. Select {Less} for a certain amount of loss in intensity or signal strength. Select {More} for no loss in intensity or signal strength.

{Audio out delay}: Automatically sync the image on this display to the audio from a connected home theatre.

{Audio out offset}: Adjust the setting for audio output delay. Available if {Audio out delay} is switched on.

14

Image 22
Contents BDL3220QL When connecting and using your Public Safety InstructionsKnow These Safety Symbols Read and follow these instructionsImportant Safety Instructions CE Declaration of Conformity Regulatory InformationFederal Communications Commission FCC Notice U.S. Only Information for U.K. only Polish Center for Testing and Certification NoticeHow to connect a plug Electric, Magnetic and Electronmagnetic Fields EMFChina RoHS 中国电子信息产品污染控制标识要求Waste Electrical and Electronie Equipment North Europe Nordic Countries InformationEnd-of-Life Disposal VarningTable Of Contents Installation Notes Unpacking and InstallationPackage Contents UnpackingMounting on a Wall Ventilation Requirements for enclosure locatingControl Panel Remote control sensor and power status indicatorParts and Functions ButtonInput/Output Terminals List Remote ControlGeneral functions OptionsHandling the remote control Inserting batteries in the remote controlOperating range of the remote control Connecting External Equipments Connection1. RS232C control connection optional Connecting Multiple DisplaysIR Pass-through Connection optional IR connection optionalWire-connecting to Network optional To setup the networkOperation Play multimedia files from USB device Play optionsPlaying music files Movie options Playing movie filesPlaying photo files Start a slideshowUsing the remote control Change your settingsSettings Quick Picture and SoundSound menu Digital Crystal ClearNetwork Settings General settings menuSdtv Resolution Input modePC Resolution Hdtv ResolutionTypes of Pixel Defects + Dot Definition Pixel Defect PolicyPixels and Sub-pixels Bright Dot DefectsPixel Defect Tolerances Dark Dot DefectsProximity of Pixel Defects MuraFront Panel Cleaning Instructions Cleaning and TroubleshootingCleaning Cabinet Cleaning InstructionsTroubleshooting Symptom Possible Cause RemedyIn/Out Terminals Technical SpecificationsDisplay General