Philips BDL4260EL Installing and Removing Table Stands optional, To install table stands

BDL4260EL

1.4.Installing and Removing Table Stands (optional)

To install table stands:

1.Ensure your display is powered off.

2.Spread a protective sheet on a flat surface.

3.Grab the carrying handles and place the display face-down on the protective sheet.

4.After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display.

Carrying handle

Thumbscrews

Guide block

Longer portions face the front

Table stand

To remove table stands:

1.Power off the display.

2.Spread a protective sheet on a flat surface.

3.Grab the carrying handles and place the display face-down on the protective sheet.

4.Remove screws using a screwdriver and place them in a safe place for reuse.

2