Sound, Tiling | Philips BDL4260EL instruction

Advanced

Access advanced settings such as gamma, tint, video contrast and so on.

•{Gamma}: Adjust the non-linear setting for picture luminance and contrast.

•{Tint}: Change the colour balance.

•{Custom tint}: Customise colour balance setting. Only available if {Tint}  {Custom} is chosen.

•{Video contrast}: Adjust video contrast.

•{Brightness}: Adjust screen brightness.

•{Hue}: Adjust screen hue.

Game or computer

When viewing content from a connected game console, choose {Game} to apply game settings.When a computer is connected through HDMI, choose {Computer}.

Make sure that {Format and edges}  {Picture format}  {Unscaled} is selected so as to view maximum detail.

Format and edges

•{Picture format}: Change the picture format.

See page 17 for the descriptions about Picture format.

5.2.2. Sound

Picture	Sound style
Sound	Restore style
Tiling	Bass
General settings	Treble
	Balance
	Surround mode
	Audio out
	Advanced

Sound style

Access predefined sound settings.

Restore style

Restore the last-selected predefined sound setting.

Bass

Adjust to increase or decrease lower-pitched sounds.

Treble

Adjust to increase or decrease higher-pitched sounds.

Balance

Adjust to emphasize left or right audio output balance.

Surround mode

Enhance your audio experience.

Audio out

Adjust audio output volume.

BDL4260EL

Advanced

Access advanced settings to enhance your audio experience.

•{Auto volume leveling}: Enable the reduction of sudden volume changes.

•{Speaker settings}:Turn on or off the internal speakers.

•{Clear sound}: Enhance sound quality.

•{Audio out format}: Choose the type of audio output through the digital audio output connector. (HDMI only)

•{Audio out delay}: Automatically sync the image on this display to the audio from a connected home theatre.

•{Audio out offset}: Adjust the setting for audio output delay. Available if {Audio out delay} is switched on.

5.2.3. Tiling

Picture	Enable
Sound	H monitors
Tiling	V monitors
General settings	Position
	Frame comp.

With this function you can create a single large-screen matrix (video wall) that consists of up to 100 sets of this display (up to 10-sets on the vertical and 10-sets on the horizontal sides).This function requires a daisy-chain connection.

Enable

Choose to {On} or {Off} the Tiling function. If {On}, the display will apply the settings in {H monitors}, {V monitors}, {Position}, and {Frame comp.}.

H monitors

Adjust displays on the horizontal side.

V monitors

Adjust displays on the vertical side.

Position

Adjust the position of this display in the screen matrix.

Example: 2 x 2 screen matrix (4 displays)

H monitors = 2 displays

V monitors = 2 displays

		H monitors


V monitors	1		2	Position
				Position


	3		4
	3		4