Philips 50FD9955 warranty Noise reduction, Color temperature, Reset, Gamma, Low tone, Color tune

PICTURE 2 2/2

oprevious page

COLOR TEMP.	L MIDDLE M
GAMMA
LOW TONE
(COLOR TUNE)

OK J SELECT LM ADJUST MENU RETURN

WHITE BALANCE

COLOR TEMP.

GAIN	RED	L		M
GREEN
	BLUE
BIAS	RED
GREEN
	BLUE
	RESET
J SELECT	LM ADJUST		RETURN
		MENU

Noise reduction

This control allows you to reduce the noise in the picture due to poor reception or poor picture quality.

Select OFF, NR-1, NR-2or NR-3according to the level of noise present.

Note: Select RESET in the OPTION 1 menu, p. 13, to restore the predefined factory PICTURE settings.

Color temperature

This control allows you to select the color temperature and the white balance of the picture.

&Press the cursor left/right to select HIGH (bluer), MIDDLE (standard), MIDDLE LOW (redder) or LOW (white balance).

éSelect LOW to adjust the white balance for bright and dark pictures.

“Press the OK button to display the WHITE BALANCE menu.

‘Select and adjust Red-Green-Blue Gain to adjust the white balance for signal level.

Select and adjust Red-Green-Blue Bias to adjust the white balance for black level.

Reset

This control allows you to reset the white balance settings back to the predefined factory values and settings.

Gamma

This control allows you to adjust the brightness of the midtone areas while keeping shadows and highlights unchanged.

Select 1 to 4.

The picture becomes darker as the number increases;

Low tone

This control allows to reproduce more detailed tone especially in the dark area.

Select AUTO or 1 to 3.

•AUTO will automatically upraise the picture and make adjustments;

•1 is suitable for still pictures;

•2 for motion pictures;

•3 will apply the error diffusion method.

Color tune

(This function can adjust video input and DVD/HD input only.)

This control allows you to adjust the hue and color density for red, green, blue, yellow, magenta and cyan.

You can accentuate the green color of trees, the blue of the sky, etc.

RESET resets the settings to the predefined factory values.

11