OPTION 2 | 2/2 |
oprevious page
POWER MGT. | L ON M | |
(CINEMA MODE) |
|
|
LONG LIFE |
|
|
GRAY LEVEL |
|
|
S1/S2 |
|
|
PICTURE SIZE |
|
|
POWER ON MODE |
|
|
J SELECT LM ADJUST |
| |
MENU | RETURN |
LONG LIFE
PLE AUTO (ORBITER)
INVERSE
SCREEN WIPER
SOFT FOCUS
J SELECT LM ADJUST MENU RETURN
Option 2 menu
Power management (only in VGA mode and DVI input)
Select POWER MGT. ON to turn the power management function on.
The power management function is an
Note: if the computer’s power is not turned on, the power management function is set to OFF.
Cinema mode
Select CINEMA MODE ON to automatically discriminate and project the film image in a cinema mode suited to the picture (NTSC, PAL60, 480I, (60Hz) only).
Long life
This control allows you to select a setting to prevent or to reduce
&Select LONG LIFE.
éPress the cursor right to enter the menu.
“Select PLE AUTO or LOCK 1, 2 or 3.
•AUTO automatically adjusts the brightness of the screen to suit the picture quality.
•LOCK sets the brightness level to minimum in the order of LOCK 1, 2, 3.
‘Select ORBITER ON to shift the picture.
This function allows you to decrease the picture burn of horizontal dot and vertical line.
(Select INVERSE ON, OFF or WHITE.
•ON : the picture is displayed alternately between positive and negative image.
•WHITE : the entire screen turns white.
•OFF : the inverse mode does not function.
When having selected ON, press the OK button to enter the inverse/WT menu and to set the timer functions.
-Select WORKING TIME and enter the hours (h) and minutes (m) with the cursor buttons to select the time the inverse mode has to be active.
-Select WAITING TIME and enter the hours (h) and minutes (m) with the cursor buttons to select the time after which the inverse mode should become active.
§Select SCREEN WIPER ON or OFF.
•Select ON and press the OK button:
a white vertical bar is moving from left to right over the screen to prevent
•Set the timer functions (see the inverse mode) and the speed (from 1, fast, to 5, slow) with the cursor buttons in the SCREEN WIPER menu.
èSelect SOFT FOCUS OFF, 1-4.
SOFT FOCUS settings reduce the edges and soften the picture. The higher numbers create a softer image.
14