Preparation
ANTENNA
CABLE
CABLE OR ANTENNA
75
Do not insert the power plug in a wall socket before all connections are made.
Place the TV on a solid surface.
For ventilation, leave at least 4” to 6” free all around the TV. Do not place the TV on a carpet. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.
Mounting the TV on the wall
This TV set complies with the VESA standard for wall mounting. Refer to specification page 35 for detail.
Caution: Installing the TV requires special skills that should only be performed by qualified personnel. You should not attempt to do the work yourself. Philips bears no responsibility for improper mounting or mounting that results in accident or injury.
Make sure that the wall mount is being fixed securely enough so that it meets safety standards.
2Basic connections to the TV
Your integrated digital TV automatically decodes and displays the four basic DTV picture resolution standards.
-SDTV (Standard Definition TV) are broadcast as 480i
-HDTV
Your TV has an integrated HDTV tuner, which receives and decodes terrestrial ATSC and unscrambled cable (QAM) signals and displays them. There are two ways to obtain HDTV content:
-through a cable provider
-through an antenna.
Note: Use the illustrations on the left for cable or Antenna connections.
5