•[100 Hz Clear LCD]: Sets the TV refresh rate to a maximum of 100Hz to provide superior motion sharpness, better black level, high contrast with a flicker free, quiet image and a larger viewing angle.
•[Super resolution]/[Advanced sharpness]: Enables superior sharpness, especially lines and contours in the picture.
•[Dynamic contrast]: Enhances contrast.
•[Dynamic backlight]: Adjusts brightness of the TV backlight to match lighting conditions.
•[MPEG artefact reduction]: Smooths out transitions on digital pictures. You can switch this feature on or off.
•[Colour enhancement]: Makes colors more vivid and improves the details in bright colors. You can switch this feature on or off.
•[Gamma]: Adjusts the midtones intensity in the picture. Black and white are not affected.
•[PC mode]: Enables picture settings adjustment when a PC is connected to the TV via HDMI. If enabled, you can select [Picture format] > [Unscaled] which provides maximum detail for display of PC content.
•[Light sensor]: Adjusts settings dynamically to match lighting conditions.
•[Picture format]: Changes the picture format.
•[Screen edges]: Changes the picture size.
•[Picture shift]: Adjusts the position of the picture.
Change picture format
1 Press (Experience).
»» The experience bar appears.
2 Press the Navigation buttons to select [Picture format], then press OK.
3 Press the Navigation buttons to select a picture format.
»» The selected picture format is previewed.
4 Press OK to confirm your choice.
»» The selected picture format is applied.
Tip
•• Picture formats are also accessible via the [Setup]menu.
The following picture formats can be selected.
Note
•• Depending on the picture source, some picture formats are not available and will not be seen
•• Before you adjust [Unscaled], select [Picture]
>[PC mode] > [On], then press OK to enable the option.
E n g l i s h
EN 13