Philips 47PFL3605H/12 Change TV preferences, Update using OAD, Press OK Press Menu to exit

Update using OAD

1If using (DVB-T) digital broadcast, your TV automatically receives software updates. If you receive a message on your screen asking you to update your software:

•Select [Update now] to update the software immediately.

•Select [Remind me later] to exit the update screen at that time and be reminded later.

•Select [Cancel] to skip the update.

2If you select [Cancel], you can manually access the OAD update by selecting [Setup] > [Software update] > [Local updates] > [OAD].

3Select the available version of OAD and press OK.

4Follow the on-screen instructions to start the update.

Note

•The TV restarts after the software update is complete.

Change TV preferences

Use the preferences menu to customise your TV settings.

1Press MENU.

2Select [Setup] > [Installation] > [Preferences].

•[Location]: Optimises TV settings for your location - home or shop.

•[Volume bar]: Displays the volume bar when you adjust the volume.

•[Channel info.]: Displays information about the TV channel every time you switch channels. Select [Full] to view channel information or [Off] to turn off the channel information.

•[Universal access]: Enables or disables the universal access menu.

•[EasyLink]: Enables one-touch play and one-touch standby between EasyLink-compliant devices.

•[Pixel Plus Link]: Overrides the settings of connected devices and uses the settings of the TV.

(Only available if EasyLink is switched on.)

•[Teletext 2.5]: Enables or disables Teletext 2.5. (For digital TV)

•[E-sticker]: For shop mode only. Sets the location of the e-sticker.

3 Press to select your preference.

4Press OK.

5Press MENU to exit.

English

EN 25