Rename channels
You can rename channels.The name appears when you select the channel.
1When watching TV, press OK to display the channel grid.
2Select the channel to rename.
3Press 
OPTIONS.
» The channel options menu appears.
4Press 
to select [Rename channel],
then press OK.
» A text input box appears.
5 Press 
6Press OK to confirm each character.
7Select [Done], then press OK to finish renaming channels.
Tip
•Press [Aa] to change an uppercase letter to a lowercase letter and vice versa.
Rearrange channels
After you install channels, you can rearrange the order in which they appear.
1When watching TV, press OK to display the channel grid.
2Press 
OPTIONS.
» The channel options menu appears.
3Press 
to select [Reorder], then press OK.
4Select the channel to rearrange, then press
OK.
» The selected channel is highlighted.
5 Press 
to move the highlighted channel to the desired location, then press OK.
6Press 
OPTIONS.
» [Done reordering] appears on the screen.
7Press OK to confirm.
8Press 
BACK to exit the channel grid.
Test digital reception
You can check the quality and signal strength of digital channels.This allows you to reposition and test your antenna or satellite dish.
1Press 
MENU.
2 Press 
to select [Setup] >
[Installation] > [Channel installation] > [Manual channel search].
3Press 
to enter the menu.
4 Press 
to enter the frequency of the channel you want to test.
5Press OK to confirm the frequency, then press OK again to confirm [Search].
6When complete, select [Store] to store the frequency.
Note
•If the signal quality and strength is poor, reposition the aerial or satellite dish and retest.
•If you still have problems with the reception of your digital broadcast, contact a specialised installer.
English
EN 29